This technology is only available in some large vehicle manufacturers.

Like some smaller agricultural machinery factories and tractor factories, they either use manual painting.

Or just use a very crude air compressor to paint the car. Si

Their model relies purely on manual operation and touch operation. The thickness of the sprayed paint is uneven and the smoothness is not high.

It's not that they can't make the paint surface smooth, smooth and highly reflective.

It's just that if you want to achieve the level of uniformity and glossiness of the furniture factory's paint.

That requires skilled workers to polish it carefully by hand, observe it with the naked eye, and touch it with your hands.

Then, by spraying paint bit by bit and repeatedly, we can achieve the spray paint effect of Tianjing Fashion Furniture Factory.

So let's do it.

It is okay to produce small batches of customized products, but large-scale production is not possible.

The spray painting equipment of Tianjing Shixing Furniture Factory is a complete set of data obtained after repeated experiments and countless adjustments to the nozzles.

Just by experimenting with spray paint thickness and uniformity, the furniture factory didn't even know how much paint was wasted.

It can be said that every fine-tuning in the experiment costs a lot of money.

In this regard, it is equivalent to the research and development of new material technology, which can only go through countless tests and repeated experiments.

Only then can a complete set of data be solidified.

For example, when the room temperature is 20 degrees, what should be the flow rate per second of a blue paint nozzle?

Different brands of paint have different particle diameters.

So how can we achieve the best formula?

What should the flow rates and pressures of other colored nozzles that match it be?

When the room temperature in the paint shop reaches 30 degrees, what pressure should each nozzle need to output?

What should be the flow rate of paint?

If in winter, the room temperature in the spray paint shop becomes minus 15 degrees, the paint at this time will become more viscous.

When encountering this situation, how to adjust the flow rate of the nozzle?

What should the pressure inside the air compressor be?

There is no shortcut when it comes to adjusting these details.

It is even more impossible to overtake in corners.

The same principle applies: the paint shop looks very simple, it is nothing more than a large oven and a few large industrial fans.

But for paint surfaces with different thicknesses, what drying temperature should be used to prevent the paint from flowing or bursting?

Different solid wood materials also require different drying temperatures.

For different woods, used in different areas, they require different moisture contents.

Only in this way can the modular furniture enter the customer's home.

The joints between the furniture frame, doors, drawers, and furniture will not crack.

So that there will be no dimensional offset.

As for other people's furniture factories, they don't have this awareness at all.

In order to prevent too serious deviations between the furniture door and the frame, other furniture manufacturers adopt a stupid method: thickening the wood of the board and frame.

Once it is thick, the deformation of the furniture will not be too serious.

After the customer bought it back, he just made do with it and used it, so he didn't dare to be so particular about it.

But times are different now.偲

The pockets of the masses have become much richer.

It is no longer like before, when it was purely a period of product shortage.

Everything you can buy is pretty good, so you don’t have a choice.

Nowadays, people have higher pursuit of the quality of goods.

It no longer works to use the stupid, thick and black products to fool them.

therefore,

The spray painting and baking workshop of Tianjing Shixing Furniture Factory seems simple, but in fact, if you want to do it well, the technical content is quite high.

What Tianjing Shixing Furniture Factory has a higher technical content is the paint mixing technology.

Only when workers are able to maintain a consistent mixing ratio when mixing paint can the surface color of the furniture be even.

This is equivalent to the fact that in future generations, once the paint on those luxury cars is damaged, they must return to the original factory to have the exact same paint surface made.

Although the requirements for the two are very different, the principles are the same.

Tianjing Shixing Furniture Factory has a complete set of process for mixing paint:

Under what temperature conditions and how many grams of various base colors should be added to the paint, there are strict data controls.

Unlike other furniture factories, which rely purely on the experience of veteran workers to operate.

Their paint mixing is equivalent to Chinese stir-fry.

A little salt, a spoonful of vinegar, three star anise, appropriate amount of bean paste...

But the problem is the spoon used to measure vinegar. It can be big or small. How much salt is enough?

How can we call Doubanjiang an appropriate amount?

When to add which condiments to achieve the best results?

This makes it difficult to operate.

Moreover, the old workers of this period still retained the traditional feudal ideas of old craftsmen in their thoughts.

——Technically, I always like to keep a secret.

But Tianjing Fashion Furniture Factory is different.

In this factory, every process flow is purely based on fixed-line data to control product quality.

Therefore, these spray painting, baking and paint mixing technologies are the core technologies of Tianjing Fashion Furniture Factory.

Jianteng had already started experimenting with these things when he was still working in the cosmetics factory.

But now,

Luo Xuan is actually planning to teach these techniques to other furniture factories! Si

Isn't this equivalent to digging your own grave?

Leader Wei is not unenlightened, nor is he the kind of person who has no overall perspective.

But when he heard about Luo Xuan's proposal, he also began to frown: "Comrade Luo Xuan, please tell me your real intention first.

Only if you speak clearly and let all the leaders here know what you are saying, can everyone be willing to provide strong support to the furniture factory in your commune."

Faced with the inquiry from Leader Wei, Luo Xuan did not dare to hide it.

I had no choice but to reply honestly: "Leaders, the furniture market... is huge! It's bigger than all of us imagined."

The world outside is very vast. Si

The entire furniture industry is a big industry worth several trillions in the world.

Since the market share is so large, a mere Kaitianjing Fashion Furniture Factory is expected to have sales of only one million yuan a year.

That being the case.

Why do we need brothers to fight against each other? Why do we want to fight internally?

Even in the entire Tuocheng area, everyone produces furniture, thus creating a scale effect.

even so,

The overall output value is just a drop in the ocean compared to the total sales. Si

As long as everyone has the courage to innovate and invest, they can create their own competitive products.

Why worry about no sales?

If you want to become bigger and stronger, you must set up checkpoints on the road to reject competition from others.

That definitely won't work.

If you want to become stronger and bigger, you can only move forward bravely and catch up.

What competition are you afraid of?!

mustached

()
Chapter completed!