Font
Large
Medium
Small
Night
PrevPage Index    Favorite Next

1603 Three-roller rolling mill(2/2)

Chang Mingjie and Chen Bin were both engineers and had already realized where the problem was when Yang Xiaotao pointed it out. Liu Daming and the others were also aware of the problem.

"I did some calculations. According to past data, if we design and manufacture it according to this, the power will not meet our needs, and if it is used forcibly, it is likely to cause mechanical failure!"

"I tried it just now. The power system is similar to the previous rolling mill, but with an extra roller, the effect is greatly reduced."

After Yang Xiaotao finished speaking, everyone nodded, and Pang Guo on the side asked, "We produced two in the early stage, but the results were not good."

"Now it seems that there is really a problem with the power."

Liu Daming also nodded.

"Actually, the power is not strong enough and the speed is not fast enough. If it slows down and becomes unstable, the accuracy will naturally be affected."

After saying that, Liu Daming looked at Yang Xiaotao again, "Mr. Yang, now that you have discovered the problem, how do you solve it?"

After Liu Daming finished speaking, everyone immediately looked at Yang Xiaotao.

Yang Xiaotao did not disappoint. He pulled out a piece of paper from the bottom of the design drawing, which showed his revised design drawing.

Everyone looked again and found that changes had indeed been made to the power system.

Moreover, this change also expanded the rolling mill a lot.

This is the result modified by Yang Xiaotao based on the original design.

Although the system did not give an evaluation, in Yang Xiaotao's opinion, this simple design is feasible.

"Actually, there is nothing wrong with our design, but we just didn't consider it comprehensively."

"My opinion is that the material of the movable roller should be heavier and harder."

"At the same time, comrades who increase the power output and increase the counterweight..."

Following Yang Xiaotao's explanation, everyone understood the difference.

"Understood?"

After Yang Xiaotao finished speaking, he saw no response from the crowd, so he hurriedly asked.

Chang Mingjie reacted quickly and nodded hurriedly.

"clear!"

Liu Daming clapped his hands, "If I had known earlier, I would have waited until you came back to do it. This is a waste of emotions and materials."

While talking, Hou Baoyu poked his waist. Liu Daming looked back, only to find Hou Baoyu looking at Zhang Guanyu next to him. The latter's face froze after hearing this, and he looked a little depressed.

Everyone knows that Director Zhang of the R&D Department is an honest boy. He doesn't talk much, but he does things in a orderly and serious manner.

The attitude is very positive.

In the early years, because the work was slow, Yang Youning said, "The stupid bird flies first. If the work is slow, then come early."

As a result, after that, when others arrived at work at eight o'clock, he came at seven o'clock.

And for so many years, except for business trips, I always come in early and leave late.

This attitude, in the eyes of everyone, is more popular than personal ability.

"Ahem, I feel like I wouldn't be where I am now without the previous accumulation."

Liu Daming hurriedly changed his words, and Hou Baobao nodded, "Yes, yes, what Lao Liu said is right. We almost succeeded. It's only a matter of time."

After speaking, he picked up the drawings and walked aside to prepare to modify the power equipment and strive to complete the production of the rolling mill as soon as possible.

Chang Mingjie nodded after hearing this, and Zhang Guanyu saw the expressions on everyone's faces and felt very grateful.

"well said."

"We who work in design never succeed every time. Failure is the norm."

Yang Xiaotao walked up to Zhang Guanyu and said, "Director Zhang."

"Mr. Yang!"

"I have another mission here."

Hearing what Yang Xiaotao said, Zhang Guanyu nodded in agreement.

"Mr. Yang, please tell me!"

"Well, the three-high rolling mill is ready, but it's not the end."

"Six-high rolling mills have been manufactured abroad. How big the gap is cannot be summed up simply by one, two or three."

After Yang Xiaotao finished speaking, he looked at Zhang Guanyu seriously, "So the task assigned to you is to make a four-roller rolling mill, or a higher six-roller rolling mill..."

"In the future, our domestic steel rolling mills will also be able to use our own rolling mills."

"This is of great significance to national development and revolutionary construction. You must work hard!"

Zhang Guanyu looked excited. The fact that Mr. Yang entrusted them with such an important task showed his trust and respect.

"Don't worry, Mr. Yang, our R&D comrades will go all out to complete the assigned tasks."

Zhang Guanyu shouted loudly, and Liu Daming and others who were busy at the side opened their mouths. They were also members of the research and development team, but they were not sensitive to what Yang Xiaotao said.

Of course, this is also related to their status. They are only responsible for doing it. As for how to do it, they still have to listen to the designers.

But it is really an honor for them if it is finally completed.

"Don't be stressed. Once this three-roll rolling mill is built, let the steel plant use it first. Let's do it step by step."
Chapter completed!
PrevPage Index    Favorite Next