Machinery factory, second workshop.

When Yang Xiaotao walked in, there was a rumble around him.

Each worker is busy, and they cannot be distracted by the work at hand, otherwise a component will be destroyed.

Here, every worker has his own position and is responsible for the parts he produces.

Now the second branch factory already has a mature processing system.

Ordinary semi-automatic milling machines, lathes, etc. can already be produced on a large scale. After the products are processed, the pass rate has exceeded 80%.

At the same time, this is also the main product produced by the second workshop.

As for the somewhat difficult machine tools like Daystar and Shining Daystar, the success rate is about 60%, and there are not many people in charge of production, but they are all veteran workers above Level 6.

Of course, the machinery factory is also thinking about adjusting the ratio of personnel and increasing the production quantity of machine tools like Venus.

But in the end, it was discovered from the tasks received that compared with good machine tools like Venus, domestic demand is actually an order of magnitude lower than ordinary machine tools.

In the end, after getting to know Yang Youning and others, they found out that some of the factories that accepted Venus were doing ordinary machine tool work.

It is better to use ordinary machine tools, which are simple to process, easy to operate, and save money.

As for considering accuracy, anyway, the accuracy requirements given in the task are not high, and ordinary machine tools can also meet them, so why bother with better ones?

In response to this, the leadership of the machinery factory could only criticize it privately as "not wanting to make progress" and "holding back the revolution."

But if I really want to say it face to face, I really don’t dare.

Because there are too many people on the other side, so we can't offend the public.

Because of this, the main task undertaken by machinery factories is still the production of ordinary semi-automatic machine tools.

At this point, Yang Xiaotao and the others were speechless.

I can’t give away any good things.

Simply helpless.

The tasks of ordinary machine tools are large, but it does not mean that the tasks of other machine tools are light.

On the contrary, the production tasks of Morningstar Machine Tools are equally urgent.

Even for some purposes, it is very urgent.

However, the difficulties in the production of Morningstar machine tools have shown that without a key breakthrough in technology in the near future, it is just a dream to achieve large-scale production.

Machinery factories are also thinking of handing over the production tasks of ordinary machine tools to a branch factory or other factories.

But in today's situation, the production capacity of the first branch factory is a problem, and they also have to take on the task of producing tractors.

As for the First Machinery Department, it's not that they don't cooperate with adjustments, it's just that they can't find a suitable factory.

The First Machinery Department had previously conducted a survey, and found that the factory they had taken over could not be found.

Not to mention ordinary machine tools, even semi-automatic series machine tools. If you go there with the drawings, the machine tool manufacturers below will be blinded.

A capable machine tool factory like Jinling is feasible, but in the face of Venus, there are really not many that can be manufactured in China.

But facing the shining star, my claws were numb.

Without the help of advanced machine tools like Morning Star, the shining star would be a mirror image.

Even though the Morning Star machine tools produced by the machinery factory were given to many departments, the situation has not changed.

For example, my boss has at least three machines in his machine department.

If it is handed over to a machine tool factory, it is possible to produce a Venus, and maybe an upgraded version of the Shining Venus can also be produced.

But in fact, these three Morning Stars from the First Machinery Department are all used in other fields.

It’s not that machine tool production is unimportant, but there are more important fields.

Just like the Seventh Machinery Department, the morning stars given to them are used to produce precision parts for rockets.

Where can I find the time to study machine tools?

Moreover, machine tools are subject to wear and tear during use, and they also have a service life under normal circumstances.

Just like tool wear, this is a big burden.

Don't do porcelain work without diamonds.

If you don't have a hard enough material, think about cutting hard equipment, just dream.

There is also mechanical wear and tear, which cannot be avoided.

Just like the joints of the human body, they will wear out over time.

For these, if you want to improve, you have to use better materials and more comprehensive maintenance.

But domestic materials are just like that. If you want to develop, you must get the raw materials.

And for all this, it would be more cost-effective to let the machinery factory provide it directly.

Anyway, if the machine tool at the machine shop is worn out, you can repair and replace it yourself.

They can just use it directly, why bother themselves?

Therefore, the machine tools provided by the machinery factory have become a hot commodity.

This is why Mr. Wang from the Seventh Machinery Department always caught Yang Xiaotao and asked for the machine tool.

The main focus is a benefit.

"Mr. Yang!"

Chang Mingjie saw Yang Xiaotao coming and hurriedly stood up to greet him.

Yesterday's art performance, Yang Xiaotao gave him a chance to shine.

There were so many people in the audience, apart from the actors, they were the only ones who spoke to the chief and had close contact with him.

When he said "Go home", the elders in the family were very excited, even the children shouted happily, and his wife looked at him with admiration.

Of course, he knew that Yang Xiaotao brought all this.

Without his initial support, he would not have been the director.

Without his innovative development, the machinery factory would not be where it is today.

So he admired Yang Xiaotao very much.

Not far away, Zhang Guanyu, Chen Bin and others hurriedly stepped forward when they saw Yang Xiaotao coming.

"Mr. Yang, Mr. Yang!"

Several people came up to say hello, Yang Xiaotao nodded, and then saw Liu Daming sitting aside guarding the machine tool, "Mr. Yang, you came just in time, come and take a look."

As he said hello, Chang Mingjie on the side also showed an awkward smile, "Isn't this an improvement of the steel rolling mill? I encountered some trouble."

Yang Xiaotao was not surprised when he heard this. After all, according to the drawings they gave, it would be strange if there were no problems.

"It just so happens that I came to you for this very matter!"

After Yang Xiaotao finished speaking, he walked aside and inspected the steel rolling mill assembled next to Liu Daming.

At the beginning, Yang Xiaotao handed over his drawings of dismantling the rolling mill to the R&D department, so the design style was biased towards the alliance.

After all, the rolling mills that were dismantled were all affiliated to the alliance, so it is not surprising that they were affected.

But most of the products of the alliance have one thing in common, that is, they are rough and tough.

Of course, it may be an advantage in other aspects, but in this delicate work, it is a problem.

Therefore, it is normal that the design drawing given by the R&D Department has these problems.

This chapter is not over yet, please click on the next page to continue reading! After looking at the new rolling mill for a while, Yang Xiaotao did not speak, but Chang Mingjie on the side spoke.

"Mr. Yang, although this rolling mill has been built, the accuracy requirements are still low."

"Especially the third roller of this control, it simply cannot meet the requirements."

"We are trying to think of ways to improve it, but we have no clue at the moment!"

After hearing this, Liu Daming moved his wrist and said, "No, there's obviously nothing wrong with it. It's just that the accuracy is not up to standard. What should I do?"

Yang Xiaotao didn't say anything, he just came to the side and started the machine. A clicking sound sounded. After running for a while, Yang Xiaotao turned off the power.

Generally speaking, it was the same as his judgment after seeing the drawings.

So he walked aside, took out the original drawings and spread them on the machine.

Several people around looked at each other, and then stared with wide eyes.

Every time Yang Xiaotao took out the design drawings, it showed that the problems they were troubled by were not problems.

"I looked at the drawings given by the R&D department and tried to make the machine. Generally speaking, it meets the original design requirements and there is no problem in grasping the direction."

When Yang Xiaotao saw everyone gathered, he immediately started to explain.

"But here, I think it should be the biggest problem."

Having said this, Yang Xiaotao pointed to the power system, and everyone looked over again.
To be continued...