"It's up to you!" the general manager said tit-for-tat. "If you withdraw from the investigation and fabricate facts, then I will publish this video to the world and let everyone see who is brutally breaking business rules!"

The head of the US investigation team was stunned for a moment.

Such things have happened many times before. The European side always swallowed their anger. But this time, why would they rather break up than give in?

Perhaps, it is hiding the fact that they falsely report costs.

Although he also stole the other party's technical tasks during this trip, after thinking about it, he thought that it would be more appropriate to do a serious matter first, to confirm the dumping of German manufacturers, and then to coerce the other party in turn.

He said with a gloomy face: "We are here together, of course we have to go together. Since the General Manager is not satisfied with the conflict just now, it is better to let them go back to the office. Check the information provided by your company and not participate in the remaining investigation, what if?"

"It's good!" The general manager accepted his mistake and asked a guard to take them to the office to check the information.

Seeing his companions obediently following the guards, other members of the US investigation team had a lesson in history and never dared to break in without permission. They followed the general manager honestly and headed straight to the factory building.

There was no production line factory building. They saw a smaller factory-like building.

This time, the US leader asked: "Is this the factory?"

"This is a repair workshop. Are you interested in going in and taking a look?" The general manager squeezed out a smile and said reluctantly.

Repair workshop?

The US leader recalled that there were only more than a dozen people in the company's maintenance department. Even if it was just repairs, more than a dozen people were not enough, right? He thought about it and nodded and said, "I got it anyway. It's good to see."

When they entered the workshop, everyone was stunned.

This place is not like an ordinary repair workshop. Rows of workers sit next to the assembly line, pick up the broken motherboard, test it with instruments, and then replace the broken components.

In the repair workshop, the computer motherboards that were returned to the repair were neatly coded in the box, separated by soft pads from each other to avoid collision and damage.

A piece of whole glass divides the factory into two pieces. The entrance part only accounts for about one-fifth.

Behind the glass wall is an automatic production line, with robotic arms dancing up and down. This is actually an unmanned production line.

Several maintenance workers will need to repair the floor board, take it out of the basket, and put it on an entrance tray with a stuffing opening.

The tray is indented and push the motherboard onto the detection table. Several beams of laser light are shot down.

A laser beam is blocked by a corner of the motherboard. On the computer screen, the position of the motherboard is immediately visible. A robotic arm extends over and adjusts the motherboard into place.

The detection results came out quickly, and the damaged components were marked in red.

There were several maintenance technicians sitting on the landlord console behind the glass wall. They used electronic pens to click on the damaged components on the screen, and entered to confirm.

A half-man high ground wheeled mechanical table. Move over, extend the robot arm, lift the main board of the replacement parts, and slowly walk towards the maintenance table.

US investigators found that there were small holes in the workshop.

The wheeled mechanical car walked to the maintenance table and stopped. Red light shot out from a small hole. The wheeled mechanical car was positioned accordingly. The red light went out. The robot arm sent the motherboard that needed repair to the maintenance table.

The same four lasers determine the position of the motherboard. The robotic arm adjusts it correctly.

The robot arm uses its own soldering iron to remove the damaged components, and the melted solder is sucked away by the vacuum mercury. The maintenance table rotates. Before sending the motherboard to the next robot arm, install the replaced components in place.

The repaired motherboard is sent to the last assembly line for testing.

The test passed the floor main board, was sent out by the assembly line, and fell on a pallet like the discharge port at the rear. The maintenance staff labeled the main board and put it into the repaired box.

The entire maintenance process is only a few minutes.

In the meantime, there were very few maintenance workers involved, and their main task was to monitor the computer main console and interfere with possible errors in the robotic arm.

US investigators thought they were in a dream until the repaired motherboard was taken away. They rubbed their eyes in disbelief, trying to determine whether they were dazzled or not.

This is simply an ultra-modern factory!

Standing here, they have the illusion that they cross time and space to the future world.

After leaving the repair workshop, the US investigators were still a little dazed.

The head of the US local investigation team was already vaguely uneasy. A repair workshop has such an advanced automated production line, so the motherboard production workshop...

He had already anticipated what he might see.

But when he really saw it, he hated his imagination, which was so poor.

In the seven or eight meters high factory building, there are overpasses spanning it above. They are walking on the overpass, looking down from top to bottom, overlooking the entire assembly line.

On both sides of the assembly line, there are two rails about a foot wide.

Its shape is not like train tracks, but is a sliding track similar to a lathe, with very high accuracy.

The robot arms are installed on the mobile station and move simultaneously on the side of the assembly line through an ultra-precision stepper motor. On a assembly line of more than 100 meters, there are more than 20 robot arms that take off the motherboard that needs to be processed from the flow belt. According to the predetermined procedure, clip the components and place them in place. Then solder them.

There were only a few skilled workers walking back and forth in the production line, but judging by their responsibilities, it seemed that they were only responsible for repairing the robotic arms.

In a large landlord control room, more than 20 technicians are responsible for adjusting controls.

In the production workshop, there is a quiet area, with only flowing water strips, making a uniform sound.

Standing on the overpass above the workshop, everyone doesn’t know what to say. With such an advanced and modern production line and so many robotic arms, German manufacturers certainly don’t need to hire so many workers.

No matter how hard the workers work, can they be as tireless as robotic arms. They will work consistently for more than ten hours?

Even if they persist, can they still maintain the highest accuracy and work quality at the end as high as they were at the beginning? Will there be no mistakes in the production process of the motherboard?

cannot!

The investigators from both European and American parties who participated in the investigation understood that they had reached the core of joint manufacturing, which is the truth that the remediation rate of joint manufacturing sites is so low, the output is so high, and the price is so cheap!

But who can copy their success?
Chapter completed!