The heat energy flows to the generator set through guidance.

...

There is actually not much difference in the power generation process between controllable nuclear fusion power generation and conventional nuclear fission power generation, apart from the magnetic fluid generator set.

Both guide the heat generated by nuclear energy to the generator set, thereby providing heat to the steam generator, heating the liquid water into steam, and then driving the steam turbine to rotate, converting the thermal energy into mechanical energy; then the steam turbine drives the generator to rotate, converting the mechanical energy into

Electric energy.

As for the magnetic fluid generator, that is a different principle.

Of course, there is a difference between nuclear fusion power generation and nuclear fission power generation.

For example, in terms of controlling power generation, nuclear fission controls the nuclear reaction rate in the nuclear reactor by cutting off the control rods and absorbing neutrons, thereby slowing down the rate of the nuclear reaction and reducing the heat output.

In nuclear fusion, you input as much deuterium and tritium raw materials into the reactor chamber as you need in terms of electricity and heat energy.

As long as the upper limit of what the reactor chamber can withstand is not reached, and as long as you attach enough generating units, a controllable nuclear fusion device can drive an extremely large number of generating units.

With the connection of a set of magnetic fluid generator units and conventional units, a new round of experiments began.

When the energy comparable to stars was guided out of the Dawn Demonstration Reactor, the generator set deployed not far away started running smoothly!

The fuel heated into plasma quickly flows along the pipe to the magnetic fluid generator, cutting the magnetic field lines at high speed, and then converting it into a steady stream of electrical energy.

And this is not the end. The plasma that has gone through a round of power generation still contains considerable energy. They will follow the guidance and flow to the ultra-supercritical generator set and supercritical generator set, continuing their mission and dedicating every day.

A touch of heat.

In the main control room, Xu Chuan stared at the screen closely, waiting for the good news to come.

Finally, a loud report sounded in everyone's ears.

[The No. 1 magnetic fluid generator unit is working normally! High-temperature plasma cutting magnetic induction lines is detected! Electric energy output is detected!]

[The No. 1 ultra-supercritical generator set is working normally! The current steam generator temperature has reached the critical value! The steam turbine has been started! Electric energy output has been detected!]

[The No. 1 supercritical generator set is working normally! The current steam generator temperature has reached the critical value! The steam turbine has been started! Electric energy output has been detected!]

[The load of the No. 1 combination generator set has reached full load, and the current total generated power has reached its peak!]

........
Chapter completed!