"Old Chen, go and take a rest!"

Taking advantage of his free time, Yang Xiaotao saw that Chen Chonghan was still busy and said, "As long as I'm here, you can sit aside for a while."

Chen Chonghan shook his head after hearing this, "It's okay, I'll take it slow, my body will just get used to it."

"By the way, the compressor is ready this time. What do you plan to do next with the engine combustion chamber?"

While Chen Chonghan was making parts, he asked about the engine.

"This combustion chamber is a big problem. Back in Shicheng, we spent a lot of effort to barely meet the acceptance requirements."

"Especially the issue of materials. All kinds of alloy metals have been tried, and the waste samples are piled up in half the room."

Today, Yang Xiaotao’s Hongxing Machinery Factory’s ‘HXJ-1’ project started in March and has been in the works for more than four months. Generally speaking, the progress is going smoothly.

So far, the production of the air intake device blades has been completed, as well as the production of the first difficult press.

However, some of the designs also made him feel novel.

Just like the air intake device, according to Yang Xiaotao's design, a front bearing is installed in the front inner box, and there are also adjustable inlet guide vanes. This design is refreshing to him, at least according to the news from the Three Machinery Department

, the front air intake device is the same as the previous MiG engine.

There is also the compressor, which is one of his main research projects at the Shicheng Research Institute.

Compared with the structural drawings of the compressor that I got at that time, they were almost a younger brother than those designed by Yang Xiaotao.

This 14-stage axial flow type has six more stages than the opponent's.

Especially the five at the back are adjustable blades. He really dared to think of this design.

Doesn't he know the consequences of lax design?

Doesn't he know that this kind of design that requires judgment can easily fail?

And it’s so difficult. He himself is an eighth-level master, doesn’t he understand?

But that’s what Yang Xiaotao did.

However, a group of guys in the machinery factory who had been pumped up just followed this trick, as if they had not missed the drawings that Yang Xiaotao had brought out.

If it hadn't been made possible through everyone's hard work, he would have doubted that Yang Xiaotao would dare to design anything as soon as he thought of it.

Fortunately, everyone has mastered the manufacturing method. I don’t say it is 100% successful, but there is a half success rate.

In the future, if training is strengthened or the accuracy of the machine tool is improved, the success rate will increase.

The next combustion pressurized chamber is another key part of the engine.

When Chen Chonghan said this, he also reminded Yang Xiaotao not to play tricks, just be normal.

It's not easy to get to this point, just do it step by step.

However, after Chen Chonghan said so much, Yang Xiaotao still calmly picked up the new rough blank and placed it on the machine tool. Then he turned back and looked at Chen Chonghan in surprise, "Combustion chamber? Oh, you are talking about the engine."

"Well, this, I don't plan to make a combustion chamber?"

Tsk~~~

Chen Chonghan flicked his finger, and a piece of the entire component was chipped off, turning it into a scrap.

Several operators around heard the sound and immediately looked over. Seeing that it was Chen Chonghan who made the wrong parts, they all became curious, knowing that he had never made mistakes before.

But at this time, Chen Chonghan couldn't care less. He put down the machine tool, turned off the power, and walked to Yang Xiaotao, "You, what did you just say?"

"Don't plan to make a combustion chamber?"

"No, what are you talking about? If you don't make a combustion chamber, then what kind of engine are you going to make?"

"Doesn't your engine have a combustion chamber?"

"No, it's impossible, how could it not be possible?"

Chen Chonghan's eyes were filled with surprise and a hint of excitement.

The engine designed by this guy is indeed different from that of the Three Machinery Department.

"I didn't say there was no combustion chamber."

Seeing Chen Chonghan coming over excitedly, Yang Xiaotao slowly spoke.

"Then you are..."

"I want to make the turbine first."

Yang Xiaotao expressed his thoughts, and Chen Chonghan stood on the spot with a solemn expression.

"Build the turbine first? I remember that for the engine of the Third Engine Department, the combustion chamber was built first, and then the turbine was built."

"Did you make the exhaust nozzle after the turbine?"

Yang Xiaotao fixed the rough embryo on the side and prepared to dry it, and asked casually.

Seeing Chen Chonghan standing aside and nodding, he had better explain clearly first.

"Yes, we did it according to the axial flow line, step by step, and finally completed it."

"So, that's your engine, not what I do."

Yang Xiaotao spoke calmly.

Chen Chonghan was speechless.

As a seventh-level engineer recognized by the system, Yang Xiaotao has acquired knowledge that people like Chen Chonghan cannot imagine, and they have never been exposed to.

Yang Xiaotao realized this problem when he was sorting out the AL-21 engine drawings.

If you follow the steps step by step, you should be able to do it from beginning to end.

But things are urgent, so respond accordingly.

From the very beginning of blade manufacturing, Yang Xiaotao discovered that some things cannot be dogmatic. Just like a press, since it cannot be done in one step, why not disassemble it for processing.

Isn’t the problem solved now?

So after studying the diagram, Yang Xiaotao discovered that after the fuel is ignited, the high-temperature and high-pressure gas in the combustion chamber is intended to drive the turbine. Since the purpose is the turbine, why not make the turbine first?

This is the relationship between shoes and feet.

The shoe should fit the size of the foot, not the tightness of the shoe, not the foot.

The latter can be worn, but it doesn't fit your feet.

"My idea is to build the turbine first and then the combustion chamber."

"The core part is done, and the rest is easy to talk about."

Yang Xiaotao did not explain, just expressed his thoughts.

Chen Chonghan came to his senses and realized that Yang Xiaotao had the final say in this matter, so he could only provide some reference advice.

But thinking about what happened to this combustion chamber when he was manufacturing engines in Shicheng gave him a headache.

When other research institutes sent over the completed turbines, my dear, when I looked at the data sheet, it was much different from the original designer's data.

Later, I asked that it was a design problem, and the corresponding data could not be achieved according to the design requirements.

This chapter is not over, please click on the next page to continue reading! So their research institute contacted the designer and adjusted the data.

This time, their combustion chamber will naturally change.

But this thing can’t be changed just by changing it.

Especially the thermal and aerodynamic issues, they were completely covered up by the designer's various 'data' during the experiment.

However, he has not seen all of Yang Xiaotao's engine drawings, and he doesn't even know if Yang Xiaotao designed them all.

But judging from his experience, this kind of design that is just done without verification can easily cause problems.

Maybe Yang Xiaotao has strong energy and he has already proved it, but there are always various problems and difficulties in production.

When he was working in Shicheng, because the material of the combustion chamber was not up to standard, he finally searched all over the country but could not find a suitable one. Then it was delayed for another three months. After no suitable material was found, the superiors could only modify the design drawings.

Increase the thickness of the combustion chamber to ensure the success of the experiment.

Finally, it was considered a successful acceptance.

All of this is experience.

And he felt it was necessary to tell Yang Xiaotao.

"Mr. Yang, this combustion chamber has to withstand the high-pressure gas from the compressor, and then the oil goes in and burns. This process is in a high-temperature and high-pressure state, and it is dynamic. That is to say, when the turbine is rotating, the air is still entering from the front, and the air is still being taken in from the front.

During compression, gas is constantly coming in, burning, and being discharged..."

Chen Chonghan gestured to Yang Xiaotao on the spot with a serious look on his face.

It can be seen that this guy has worked hard and learned a lot in order to help the Third Machinery Department manufacture engine parts.

"There is no problem if you want to make the turbine first, but if the data is wrong, you can't change it even if you change it."

"It can only be redesigned."

Chen Chonghan carefully reminded Yang Xiaotao that he had fulfilled his responsibility as a worker.
To be continued...