And behind a successful woman...

Ahem

Yang Xiaotao coughed twice, put his hand in gear, and stepped on the accelerator, "Uncle Yang, please slow down, I'm leaving first!"

After saying that, the car ran towards the office building.

"You bastard, you run so fast!"

Seeing Yang Xiaotao disappear in a flash, Yang Youning had no choice but to pat the car seat and ask Xiaoqiang to drive there early.

But I felt helpless in my heart.

If a pharmaceutical factory wants to expand its production scale, that's no problem, he wants to do that too.

After all, they are all from Hongxing Machinery Factory, right?

But you can at least come up with a plan to expand the scale. Just put it this way, you need a big jar. I am the director of a machinery factory and I know how to make a big jar!

"This bitch is so difficult to deal with!"

There was helpless melancholy in his voice.

But thinking about the next activities, Yang Youning was in a beautiful mood again.

On the other side, Yang Xiaotao stopped the car and went upstairs to the office.

There was no one in the room, so Yang Xiaotao guessed that Lou Xiao'e had gone to the Publicity Department again.

Thinking of the last task given to Chang Mingjie and the others, Yang Xiaotao wanted to take a look at the situation of the rolling mill.

Research and Development Department.

In the office, Zhang Guanyu was leading people to search for information, and the table was covered with drawings.

And in Zhang Guanyu's hand, there is also a notebook.

This book was used by Yang Xiaotao when he was dismantling and repairing the rolling mill when he was working in the third workshop. It contains the design drawings of the rolling mill that he drew by himself.

Last time Yang Xiaotao left in a hurry and just handed the drawings of the steel rolling mill to Chang Mingjie. He didn't have time to share some ideas. This time he came back just to see how far the research had gone.

But when I saw Zhang Guanyu's appearance, his eyes were darkened and the bags under his eyes were a lot bigger. It was obvious that he hadn't had a good rest these days.

As for the others, it's the same. That's how their R&D department works. When nothing happens, they can wander around the entire workshop.

But when there are tasks, it is the busiest department.

Everyone lowered their heads and were busy with what they were doing, so that when Yang Xiaotao walked in, no one noticed.

"Director Zhang."

Yang Xiaotao spoke, and then Zhang Guanyu realized that Yang Xiaotao was standing next to him.

"Yang, Mr. Yang."

Zhang Guanyu was startled, and when he saw it was Yang Xiaotao, he quickly put down his notebook and stood up to say hello.

"When did you come back?"

Zhang Guanyu took off his glasses and rubbed his eyes, looking cheerful.

"I just came back and came to check on the situation."

Yang Xiaotao said, then looked at the information on the side, "How is the research going?"

Yang Xiaotao picked up the drawing on the table, which should be part of the design drawing.

But it's obviously enlarged a lot.

"There is some progress in the research, and you are here to help take a look!"

Zhang Guanyu said, waving to the people studying on the side, and someone immediately came over with a stack of drawings.

"This is the result of our attempts these days."

"This is the design drawing of the three-roll rolling mill, which we improved based on the structure of the existing rolling mill..."

Zhang Guanyu explained the design concept, and Yang Xiaotao reached out and took the drawing and looked at it carefully, but his brows furrowed slightly.

According to the name, this three-roll rolling mill only has one more roll, but the real thing is not just one.

The reason why Yang Xiaotao felt something was wrong was because the extra roller was right next to it, as if it were listed. If it were that simple, it would probably be possible to make it with four rollers.

Moreover, this kind of design that only adds part of the structure but ignores the overall layout is obviously unreasonable!

If Yang Xiaotao were to do it, he would never design it like this.

Of course Yang Xiaotao understands these people, after all, no one has ever seen a three-roll rolling mill!

When Yang Xiaotao shook his head, the researchers in the room were a little disappointed.

Zhang Guanyu was equally helpless.

Just imagining things out of thin air is the most hopeless and the most unreliable.

Yang Xiaotao didn't say much, he just put down the design drawing in his hand, then sat on a chair aside and picked up paper and pen from the table.

When everyone saw it, their eyes lit up.

They are all old people in the R&D department, and they all know that their boss is a powerful engineer.

Although it is only level nine, that is because there is no grade examination.

Some people even suspected that if Yang Xiaotao took the assessment from his superiors, he would be at least an eighth-level engineer.

Seeing Yang Xiaotao writing, everyone gathered over to study.

Yang Xiaotao picked up the design drawing of the steel rolling mill, thought about it for a moment, and then began to modify it.

The first machine Yang Xiaotao came into contact with was the rolling mill, and he was most familiar with the Alliance rolling mill used in the machinery factory.

In addition to the books on machinery brought back from Kazakhstan, although there were no direct design drawings of the rolling mill, Yang Xiaotao still understood the theoretical development direction of the machine.

Right now, all he has to do is put these theories into practice.

"The future direction of machinery development will be more convenient automation..."

After Yang Xiaotao finished speaking, he drew a line on the drawing of the two-roller rolling mill.

"Everyone's thinking is changing in this direction, so some things cannot be fixed!"

"Like this one, all three are fixed, so why not let the middle one move?"
Chapter completed!