Last year, Motta Machine Tool sold a total of 136,000 units of various machine tool products, of which CNC machine tools accounted for more than 80%.

In the field of domestic CNC machine tools, Motta Machine Tools is the absolute vanguard. Even compared with foreign CNC machine tools, it is not too far behind.

Maybe in terms of accuracy, it will be worse than their most advanced ones, but don't forget that in normal industrial production, the accuracy requirements are not that high.

The performance of the CNC machine tools produced by Motta Machine Tools fully meets the needs of daily production, and the performance is even better.

The most important point is that the price of Motta Machine Tool's CNC machine tools is slightly lower than that of other machine tool companies.

There is no mention of the price being directly marked down to a cabbage price or anything like that.

If someone sells it for one million, I certainly can't say it's sold for half a million, and I can't say that I'm going to lower the price like this.

Just give it a 20% discount and sell it for 800,000.

If your opponent dares to continue to lower prices, then he will continue to lower his prices.

No matter how low the price is, considering the cost of Mota machine tools, you can still make a profit.

Just clear out some players in the market and form a few large companies in the market. On the contrary, everyone will tacitly raise the prices slowly.

There is no other way, consumers have no choice.

If you want it, you can only buy it from these companies.

Therefore, when the market is controlled by two or three companies, that is when the market begins to lose its vitality.

When a market is controlled by one company...

Anyway, the price of the product will be extremely expensive.

CNC machine tools are mechatronics products and are flexible, high-performance automated machine tools.

It well solves the problem of complex, precise, small batch and multi-variety parts processing.

The entire CNC machine tools of Mota Machine Tools are all machine tool control systems developed by Mota Machine Tools itself.

As for the control chip inside the machine tool, it is an industrial control chip specially developed by Sixiang Technology.

In terms of computing power, it is definitely inferior to the latest Xuanwu 6Plus.

However, what industrial chips pursue is not extreme performance, but stability.

It cannot be said that when the part was halfway processed, it suddenly crashed.

It's like, I was typing a document on my computer, and halfway through typing, the power suddenly went off.

The most terrifying thing is that it is a desktop computer, and it is almost murderous.

In the past, we often encountered this situation, so we introduced the automatic saving function. Even if we encounter an accident, we will not lose much.

Of course, the more functions there are, the higher the performance requirements for the computer.

With the continuous advancement of semiconductor manufacturing processes, microelectronic chips are becoming more and more powerful in performance.

Chen Huaiqing looked at the CNC machine tools being assembled, and the control computers of the machine tools were now being installed.

The computer is produced by Chenxing, a computer specially produced for machine tools.

Many computers equipped with machine tools can still be used normally even after twenty or thirty years.

In terms of running speed, there is no problem at all.

Machine tools have a long service life.

In many factories, you can still find machine tools produced before and after World War II. These machine tools are still in operation as main production equipment.

The service life of CNC machine tools is not required to be as long as that of traditional machine tools, but it cannot be said that it will be scrapped in less than ten years!

No matter what, it will take 20 to 30 years to persist.

This kind of computer specially developed by Chenxing for CNC machine tools is now excellent in terms of anti-shake, flying dust and stability.

In terms of design ideas, it is definitely very different from the civilian computers currently on the market.

What civilian computers pursue is more performance, and then they are lighter and thinner.

This kind of machine tool control computer does not need to put much effort into being thin and light. What is more important is that its performance meets the requirements and its operation is stable.

Therefore, when writing the entire control system, we try to simplify the code as much as possible.

If you can explain it in one sentence, don't use two sentences.

The more streamlined the code, the smaller the chance of problems.

Chen Huaiqing picked up a box of machine tool tools next to him. This tool was not produced by Mota Machine Tool, but by a company affiliated with Yuzhou Special Steel.

Yuzhou Tool Manufacturing Co., Ltd.

Yuzhou Tools develops and manufactures cutting tools for machine tools, mainly high-speed steel and carbide cutting tools.

There are five main types of machine tool tool materials: high-speed steel, carbide, ceramics, cubic boron nitride and polycrystalline diamond.

Yuzhou Tool has basically not covered the research on the other three types of cutting tools.

After all, as a subsidiary of Yuzhou Special Steel, Yuzhou Tools naturally has extremely high advantages in metallurgy.

Yuzhou Special Steel has been doing quite well over the past few years, and the domestic demand for special steel is increasing day by day.

As the most technologically advanced special steel manufacturer in China, Yuzhou Special Steel naturally makes a lot of money.

The net profit earned in a year is quite good.

Last year, Yuzhou Special Steel produced 2.5 million tons of various types of special steel, and its steel revenue reached more than 7 billion.

This year Yuzhou Special Steel's goal is to exceed 10 billion in revenue.

The third phase of Yuzhou Special Steel's new factory will be completed and put into operation in May this year. After it is put into operation, Yuzhou Special Steel will transfer a group of people from the old factory to work there, and the two furnaces will also be inspected in the old factory.

shut down.

After closure, the next step is to demolish it.

After it is demolished, a park will be built first for environmental restoration.

After being left there for ten years, it will be developed into a commercial housing community or something like that.

As for holding industrial exhibitions or the like, Yuzhou Special Steel is not interested.

Yuzhou Special Steel is a listed company and must be responsible to the company's shareholders.

The greatest responsibility to shareholders is to continuously earn profits for them.

With the commissioning of the third phase project and the closure of two blast furnaces in the old area, the production capacity of Yuzhou Special Steel will be expanded to an annual output of 3 million tons.

I dare not say that we will directly increase the production capacity to 5 million or even 10 million tons.

Yuzhou Special Steel mainly produces three categories of special steel: tool steel, special steel and structural steel.

Mota Automobile is the largest customer of Yuzhou Special Steel.

Among the main raw materials for automobile manufacturing, steel accounts for 72%-88%, of which special steel accounts for 30%.

Special steel for automobiles accounts for 40% of special steel production.

Parts such as shafts, rods, and gears are all made of special steel.

In addition to cars, there are also airplanes, but as for airplanes, only a few are produced in a year, and not many are actually used.

Special steel for railways is needed for rails and trains.

In the past, Yuzhou Special Steel obtained a lot of information from the former alliance, many of which were formulas with deficiencies in technology.

Many craftsmanship is passed down by word of mouth among workers.

It's not recorded on paper at all.

Therefore, Yuzhou Special Steel must continue to conduct process tests.
Chapter completed!