The engine of the Mot220 passenger aircraft must use a domestic engine. There is no doubt about this.

The TrenT700 engine currently used by Shuangluo Company is a classic engine of Shuangluo Company. Since its official delivery in the mid-1990s, Shuangluo Company has increased its share in the wide-body passenger aircraft engine market from 15% to

50%.

Chen Huaiqing did not urge the development of the LS-837 engine to be accelerated.

This is a matter of slow work and meticulous work. If we do it in a hurry, the engine will eventually be developed, produced, and installed.

At this time, it is discovered that there is a serious problem with the engine, which will be a lot of fun.

Shuangluo Company's Trent 1000 engine was found to have cracks in the compressor blades. Problems that affect safe flight must be solved.

Not to mention replacing the engine, Shuangluo Company will have to spend hundreds of millions of pounds to solve the engine problem.

In addition, customers have to be compensated, which is also a lot of money.

Because your product quality is defective and your customers have suffered losses, is it unjustifiable not to compensate them?

If it is your own responsibility, you must shoulder it.

Otherwise, your reputation will be ruined.

It goes without saying how important business reputation is.

It is easy to destroy, but it is much more difficult to rebuild.

Shuangluo Company will have to spend more than ten to two billion pounds for this, and these are all additional expenses.

This directly caused Shuangluo Company's subsequent operational difficulties.

Of course, things haven't happened yet, this will happen ten years later.

Before Chen Huaiqing left, he demanded that the research, development and production of aero-engines be rigorous.

I'd rather be slow than fast!

Seeking speed can easily lead to bad results.

On the contrary, it is a big loss.

Next, Chen Huaiqing went to Mota Semiconductor.

Mota Semiconductor's factory is naturally not located in the main urban area of ​​Rongcheng, but in the districts and counties below.

And it has to be near water.

Semiconductor production requires a large amount of water, and it also requires ultrapure water. In order to prepare this water, electricity and other things are naturally required.

Motta Semiconductor has semiconductor factories in China that are basically distributed along the Yangtze River.

Rongcheng, Yuzhou, Jiangcheng, Jinling and Shencheng.

Among them, Chengdu mainly serves as the headquarters and R&D center.

In terms of production, it has been reduced a lot anyway.

On the contrary, in Yuzhou, chip production is increasing day by day.

Because Yuzhou is the largest notebook computer production city in China.

"Our current mass production process technology is concentrated on 45 nanometers. In addition, we have also completed mass production on the 40 nanometer process technology. The 32 nanometer process technology has made breakthrough progress and is expected to be able to achieve mass production next year.

Produce."

Technological breakthroughs cannot just be made in the laboratory, but must also be achieved in industrial mass production.

Only industrial mass production technology can create huge economic benefits.

Once you make money, you can continuously invest funds into new research and development.

Motta Semiconductor is a listed company, and its annual profits are quite high, but it is a tough guy. It has never paid any dividends in the many years it has been listed.

Not only does it not pay dividends, it also requires continuous financing from the market.

Of course, it is also because of the existence of Mota Semiconductor that it supports the development of China's entire semiconductor upstream and downstream industry chain.

The entire semiconductor industry chain is extremely large, involving countless companies and industrial workers.

Chen Huaiqing's eyes fell on a photolithography machine: "How many photolithography machines are there now?"

On the photolithography machine, there is a label Mota40.

Mota40 lithography machine is the latest model of lithography machine from Mota Microelectronics, and it is also the most advanced lithography machine.

Through improvements in process technology, photolithography of 35-nanometer chips can be directly realized.

By the way, this is an immersion DUV lithography machine.

The development potential of DUV lithography machines is still quite huge, and can reach below 10 nanometers.

EUV lithography machines are even more powerful and can achieve lithography of 3 nanometers, even 2 nanometers or even 1 nanometer.

Motta Microelectronics has been developing EUV lithography machines for many years. The prototype has just been assembled, but the effect is now simply not comparable to that of DUV lithography machines.

In addition, Motta Microelectronics’ EUV lithography machines import a large number of foreign parts.

If mass production is carried out, we don’t know what problems will occur!

Chen Huaiqing knew very well that the gangsters on the other side of the Pacific who were about to come to power were not like Xiao Shibu, who felt that there was no threat to China.

As the power of China becomes more and more powerful, it will naturally become more and more conspicuous in this world, and it cannot be hidden if you want to.

In terms of immersion lithography machines, Mota Microelectronics is at the forefront of the world.

In terms of immersion lithography machine technology, Mota Microelectronics has conducted some technical exchanges and cooperation with Neon lithography machine companies.

As for why this is so?

The reason is very simple, to fight against Asmai.

ASML belongs to the lithography machine companies that North America and Europe have jointly supported, and Neon is excluded.

Neon's photolithography machine companies naturally see this.

Previously, Neon's semiconductor industry was severely hit by the United States.

If you have a common enemy, you can form teammates.

Therefore, it is normal for Mota Microelectronics to have some technical cooperation with Neon's photolithography machine companies.

Chen Huaiqing now really hopes to maintain the status quo.

Neon's photolithography machine company is at the forefront, and Mota Microelectronics can develop with peace of mind for a few more years.

Of course, it is also a good thing to cooperate to combat ASML's development.

ASML was able to develop because it seized two technological opportunities in photolithography machines.

The first is the technical route of immersion lithography machines. This technical route should be simpler and easier to follow.

After ASML's immersion lithography machine came out, it received an order from Itel.

Neon's lithography machine company also quickly produced an immersion lithography machine, but there were no orders.

Then, it declined.

What made ASML achieve its dominance was the successful development of EUV lithography machines.

Since then, there has been no rival in the field of lithography machines.

The research and development of EUV lithography machines is quite difficult. According to the plan, they should be delivered now.

Obviously, Asmai was a little too optimistic in the past.

Chen Huaiqing remembers that it will take ten years for EUV lithography machines to be widely used.

"There are now three Mota40 units, and a process technology is being developed."

Chen Huaiqing nodded gently. Mota Semiconductor has rich experience in chip manufacturing processes.

However, as the manufacturing precision of chips becomes higher and higher, some of the manufacturing technologies of the previous generation of chips are no longer applicable to the next generation of chips.

Because new difficulties arise, new technologies must be used to overcome them.

Chen Huaiqing does not need to worry about the development of Mota Semiconductor, Zhang Rujing is there!

Chen Huaiqing came over just to take a look and express his concern.

Next, I went to Huaguo Network Shuchuan Branch to have a look.

Among domestic communication operators, Huaguo Network has the strongest technical strength and the largest number of users.

Chen Huaiqing came to Huaguo Network Shuchuan Branch to see the emergency communication support equipment.

When communication towers on the ground are damaged due to geological disasters or other reasons, it is extremely important to restore local communications as soon as possible.

Chen Huaiqing asked Huaguo Network to do research in this area.

In normal times, this thing seems to be of little use, but it can play a big role in emergencies.

The emergency communication equipment developed by Huaguo Network can be deployed and transferred at any time.

In addition to ground emergency communication equipment, there is also air emergency equipment.
To be continued...