Ji Dongqing was immersed in the urge to make a lot of money when Huang De called, and Ji Dongqing hurriedly entered the automobile department factory.

A group of people were working around an engine, and there was a blueprint spread on the table next to it.

"Dongqing, you're here just in time. In the next few days, we will dismantle this engine. Cut it into quarters along this line from here, here, and here!"

"You are responsible for leading the junior brothers in the operation. You must pay attention to safety. You are not required to be fast. You must fully understand the structure and the use of various tools!"

"The cutting speed of the angle grinder is very fast. You must wear goggles and hold the handle when operating. Be sure to..."

After Huang De pointed at the drawings and gave a rough explanation to everyone, and then emphasized in various ways, Ji Dongqing kept his eyes fixed on the drawings.

This is a Toyota truck engine. The basis for drawing has not changed at all. Even the names of many key parts have been transliterated.

It can be seen that this set of drawings is old enough, and Ji Dongqing has memorized every key point.

"Isn't he from the electromechanical department? Why is he the team leader?"

Several students from the automotive department gathered together and pointed at Ji Dongqing's back and made various accusations.

"Who knows how to lick! My grandson doesn't know how to deal with Lao Huang. Lao Huang always calls him when he has good deeds. He is so numb that he gets shit luck!"

"That's right, we won't listen to him this time. Why should we in the automotive department listen to a student from the electromechanical department?"

"You two will listen to my instructions in a moment and we will dismantle part of it ourselves. I have gone through this drawing in my head a hundred and eighty times!"

"middle!"

Ye Xiwen has always been the best in the class. This time he came here on a whim, and his family was not short of money. He just wanted to show off, but he found out that he was a supporting role, so he quit immediately.

"You guys get familiar with the tools, you guys draw the lines..."

After being assigned the task of team leader by Huang De, Ji Dongqing began to assign drawings. He didn't want Ye Xiwen and his group to just hug their arms and look at Ji Dongqing coldly, not moving at all.

Ji Dongqing has worked in the repair shop for such a long time and immediately discovered the problem, but did not explain or express his opinion.

College students are all adults. Campus factories are not formal factories in the first place. You don’t pay wages to others, so there is no need for others to listen to you.

He handed the drawing to the other party, but the other party did not take it. Ji Dongqing simply left it there.

Turn around and teach everyone how to use the tools.

"This angle grinder is very powerful, please remember when using it..."

"I can use this thing with my eyes closed, why do I need teaching? Don't worry, just follow me and get to work!"

While Ji Dongqing was explaining, Ye Xiwen ignored Ji Dongqing's orders and warnings, picked up an angle grinder, and pinched the switch. Suddenly, the entire workshop was filled with noise.

"Classmate, be careful, this thing is very dangerous..."

"You're a dangerous daddy. You're such a big-ass team leader that you really think of yourself as a human being. Who do you think is a three-year-old child? Cao! Let's go, let's go play!"

Holding an angle grinder and a stack of cutting blades, Ye Xiwen led a group of students straight to the Toyota Hino truck engine casing and glanced at the drawings.

"Look at it, my brother will teach you how to use the angle grinder!"

"Buzz..."

"Snapped!"

"boom!"

"Pah la la..."

"Buzzing..."

quiet!

Quiet!

Absolute silence!

Then the blood came down.

Ye Xiwen roughly brought the cutting blade close to the cast iron engine casing, and the blade instantly shattered.

The flying fragments scattered in all directions and hit Ye Xiwen on the forehead, causing blood to spurt out.

Ye Xiwen dropped the angle grinder with both hands, covered his forehead and yelled. The grinder was scurrying on the ground like a wild horse. Fortunately, Ji Dongqing quickly turned off the socket with quick hands and eyes.

In addition, two classmates were splashed by debris. Fortunately, it hit their canvas work clothes and they were not seriously injured, but they were still very frightened.

"Oh my god, my eyes hurt..."

"what happened?"

Hearing the shouting in the workshop, Huang De rushed over at a trot.

"Ye Xiwen did something illegal and the cutting blade hit him, hurting his forehead!"

"Send to the infirmary quickly!"

Several students around him hurriedly carried Ye Xiwen on their backs and ran outside. Huang De instructed Ji Dongqing to look here and follow him.

"I don't want to play anymore. This thing can kill people. I want my life!"

"Me too, is this a human job?"

"What the hell, Lao Huang..."

The thrilling scene just now was shocking, and the students were all frightened at this time. No matter what Ji Dongqing said, these people were far away from angle grinders and various tools, not to mention that few of them needed this skill.

.

Even when Huang De came back, no one came to get the angle grinder.

"What's going on? Once I was bitten by a snake, I was afraid of the well rope for ten years. Are today's young people so timid?"

Sitting across from Ji Dongqing, Huang De was very annoyed, and Ji Dongqing pondered for a moment.

I thought to myself that this was not surprising. After all, most of them did not expect to do car repair work after school, and there was a high probability that they would never use angle grinders in their lives.

As for dismantling the engine, maybe their grandson won't use it.

Another point is that although the school's campus factory internship is nominally a position for poor students, because the salary is too low, who is really short of money would waste time for fifty yuan a month?

Only those who have good relationships with various department supervisors look at the names of poor students to get positions, just for fun.

When I actually come to work, I often find someone to take my place.

With all the students and errands to deal with, who would take it seriously? Not to mention the scene just now.

"Teacher, I have a way to cut that thing open without using an angle grinder!"

"Very good……"

Half an hour later, Ji Dongqing used a cart to push a plasma cutting machine specialized in mechanical and electrical welding.

Looking at the Panasonic plasma cutting machine, Huang De felt a twinge of pain.

With a box of Zhonghua cigarettes and various approval signatures, Huang De obtained the right to use this machine - for one day.

"Director Hu is so stingy!"

"You can't say that. After all, the price of this thing is not low. You can do it yourself!"

Looking at Huang De's unhappy expression, Ji Dongqing quickly comforted him.

Plasma cutting is still a new thing in Jiaotong University. Ji Dongqing practiced it personally when he was an intern. Later, when he went to the repair shop, he mostly used acetylene to cut.

The Mechanical and Electrical Department is also very fond of this equipment. After all, it is imported equipment.

In order to be sure, Ji Dongqing found a steel plate and tested it first, adjusted the current to a suitable size, then put on his glasses and approached the Toyota Hino engine casing.

Nodding to Huang De, Huang De turned on the air pump switch, and the air compressor began to roar.

"Zizzi..."

"Hey, what kind of machine is this so fun?"

"Plasma cutter!"

"It's cut, damn!"
Chapter completed!