Font
Large
Medium
Small
Night
Prev Index    Favorite Next

Chapter 281 The most awesome Ka Tianye series

In the double trailer, the rear axle of the follower wheel was broken, and the wheel was still on it. It was obvious that the driver was very courageous. Ji Dongqing himself did not dare to drive in this direction.

"How long will it take to finish?"

"Come tomorrow. This shaft needs to be welded. It is a solid shaft. Now everyone uses hollow shafts. How about I change it for you?"

Looking at Xiao Gao and Xiao Hu struggling to disassemble the wheel, Ji Dongqing tried to ask.

"Repair it. I can't afford to replace it. I asked, five thousand a bar. How many five thousand do I earn? Here's my phone number. Just tell me when it's done. Throw the car here first! Help me with the carriage and these places.

Let’s clean it up and give you some money first!”

The driver was obviously trained in the old world. It is too expensive to replace the car now, and the entire car is not even worth the price of a single axle.

Ji Dongqing received an advance payment of 1,000 yuan from the other party, and the other party's phone rang over and over again.

"I said you are so anxious to lose money?"

A copycat phone, the man strolled forward with a cigarette in his mouth, found a set of clothes from the car and started changing on the street. He didn't care about the people coming and going on the street, and was only wearing a simple pair of underwear.

Xiao Hu stared blankly, Ji Dongqing pulled Xiao Hu's head, and Xiao Hu quickly lowered his head to work.

"I'll go, it's too tight!"

The puller went up and the jack held it for a long time. Seeing that the bearing was deformed, Ji Dongqing waved his hand.

"Push over the fire! Pour water on the shaft!"

Ji Dongqing lit acetylene, turned up the fire, and pointed at the inner wall of the bearing and the distal shaft.

Xiao Hu poured a little water on the shaft, and Xiao Gao began to bake the inner sleeve of the bearing.

"Huhu..."

"Bah!

"Wow!"

"boom!"

The entire bearing fell off, and the puller and jack fell off, making a hole in the ground.

Next, several workers began to clean the bearings, bearing inner chambers, and shaft ends.

It took more than half an hour to dismantle the two wheels. Xiao Gao drove the Hiace and brought the follower shaft into the campus factory of the Department of Mechanical and Electrical Engineering.

Ji Dongqing misses the pickup truck. At least he doesn't have to load and unload things like this. It's too laborious.

The master chef here, Ji Dongqing, has already treated him to a meal and sent two boxes of cigarettes from time to time. The two of them have become familiar with each other. Ji Dongqing has been processing things here a lot these days.

"Yeah, this costs 50 beds. I'll take the things off the top for you. There's no need to worry about that anyway!"

The old master clicked his tongue when he saw the follower shaft that Ji Dongqing carried in.

Ji Dongqing and Xiao Gao lifted the follower shaft onto the car together, padded the shaft head with copper foil, put the other on the center frame, made a center hole at the end, and installed the center frame.

"Buzz!"

"Dang Dang!"

As the follower shaft rotates, Ji Dongqing continuously adjusts the clamping position and taps the clamping jaws, while the master nods continuously.

"Squeak, wow, wow..."

"Here I go, this piece of shit has been heat-treated!"

The turning tool rubbed against it and screamed, and when it was fed in, it was already smoking. Ji Dongqing turned on the water spray, but the coolant did not come out.

"It's broken. I've already reported the water pump, but I haven't bought it yet..."

"Let me take a look!"

With a black line on his forehead, Ji Dongqing secretly scolded me for coming to such a bad place. Most of the things in this workshop were just decorations.

Remove the submersible pump, turn on the power and test if it doesn't work, find tools, and remove the flange bolts.

This submersible pump has obviously been replaced and is not the original one.

"Wow, let me go, the carbon brush is gone. Master Zhang, are there any accessories in the warehouse?"

"We don't have this one. The electrician might have one. He's not at work and the door isn't open now!"

"Xiao Gao, go to our place and get two!"

After seeing what the factory looked like, Ji Dongqing replaced the carbon brushes and tried it, and the rotor could rotate.

The submersible pump is put into the water tank again, and the coolant spurts out.

"Dongqing, okay, I can cultivate anything. Come on, how can I get this axis!"

The arrival of Ji Dongqing, a generalist, will undoubtedly bring new vitality to the factory. The old master rolled up his sleeves and came forward, and Ji Dongqing lit a cigarette for him.

Ask the master to drill a 35mm hole in the middle of the shaft with a depth of 60mm.

Then the other end of the shaft, flat surface, drilling, the routine is the same.

Next, I found a No. 45 round steel, machined it in the middle to be the same as the outer diameter of the follower shaft, and matched it with interference on both sides.

"Dangdang..."

The short axis side is connected, then the long axis side is connected, then Xiao Gao swings the hammer, and Ji Dongqing keeps measuring with the meter stick.

"Okay, welding machine!"

Putting on the welding helmet, Ji Dongqing took the oxygen dioxide welder and spot-welded the two sides twice, and then aligned it, once for each welding layer.

"Zizzi..."

Gradually the entire slope was leveled.

"Master Zhang, please wait until the car is flat!"

"It's a trivial matter. It's useless to be a teacher of your craft, tsk tsk..."

Knowing that Ji Dongqing was here to be the instructor, Master Zhang felt sorry for him.

After the whole big axle was loaded, Ji Dongqing and Xiao Gao continued to lift the axle onto the car.

"Eh? Dongqing, you know how to repair cars and repair the pickup truck in our factory. Then you have to go to your automotive department. Isn't that much easier than this?"

"Okay, where is it?"

"It's been in the garage for several years! That car is a field pickup truck, and its performance is very good!"

"Thank you, Master Zhang!"

After lighting a cigarette for the old man, Ji Dongqing drove home. Xiao Gao loaded the car while Ji Dongqing looked for Huang De.

"This thing is so easy, I even forgot that you can repair cars, so you just said you would be our show car. Wait for me to call and then you can get me an application!"

Huang De slapped his head, feeling secretly happy in his heart, thinking, "My sister, who can restrict me now?"

It’s easier at school, fix it! I’ll give you a reward after you fix it!

"One or two, work harder!"

Ji Dongqing and several other people pushed the Tianye pickup truck to his garage. The truck was old, the chassis was rotten, and the metal on the cargo box was basically a layer of skin.

I don't know who removed the seat from the cab, and the instrument panel and other things are completely complete.

Check whether the engine oil is good or sufficient!

As expected, the diesel in the fuel tank has been drained or stolen.

The lines are pretty good, no rats visit.

"Can this old car work, Master?"

Xiao Hu took a deep breath and took a sip of Coca-Cola. Now Xiao Hu is much stronger than when he came here. He eats big chicken legs every day, and his height and body have grown steadily.

"Baoding Automobile, a well-known domestic pickup truck specialist, made the first batch of pickup trucks in our country. Later, the brand was called Tianye. The model of Tianye is Toyota's Hilux. You cannot say that it is copied. You can say that it is exactly the same, even the engine.

yes!"

"Wow, this is a Toyota car. Let me find a car logo and change it for him!"

"You're a traffic policeman, and the traffic police won't look for you if you change your sign!"

As soon as Ji Dongqing finished speaking, Xiao Hu heard that this was a replica of Toyota, and he immediately got excited and shouted to change the label. Xiao Gao yelled, and Xiao Hu didn't say anything.

The old trick is to dismantle everything, starting from the car door, the hood, then the glass, then the instrument panel, and then the various wiring harnesses.
Chapter completed!
Prev Index    Favorite Next