"This is impossible! It is absolutely impossible!" In a Japanese testing agency, a middle-aged man in a suit and tie shouted in disguise.

In front of him, there was a test report that was extremely detailed, and on the table in front there was the exquisite leaf. The light flashing on the leaf was as if mocking him.

"How could Chinese people have such high-precision CNC machine tools?" The middle-aged man was still roaring, but the few people around him were silent and looking down at the same test report in their hands.

The detailed inspection report clearly states that the processing of the blade is exactly in line with their design expectations. Even if they are afraid of being seen, they only require the accuracy of 1 wire, but the workpiece processed by the other party has reached the processing accuracy of less than 0.5 wire.

What does this mean? It can only mean that Huaxia already has at least 5 micron high-precision four-axis machining center, or even five-axis, or just samples in the laboratory, but it has indeed achieved this accuracy.

Only this possibility can explain why the laboratory of Shuimu University can produce the finished product in just one day and one night. You must know that the samples were not given this time, and it was completely for China to produce the materials and process them by themselves. It is unlikely that the semi-finished products with the processed outlines should be refined.

It is impossible to polish it by hand? One day and one night. It is impossible, only digital processing is possible.

"Is it a product from other countries? Germany, the United States, and the United Kingdom, are they processed using machine tools from other countries?" Among the people who read the report, a man with slightly white hair asked calmly.

"We have investigated the list of purchased products from Shuimu University, and there is no high-precision CNC." A young man next to him immediately replied respectfully.

"Where is the secretly introduced?" the white-haired man asked again.

"We also communicated with our competitors in Europe and America in private. On the stance of blocking China, everyone was the same. No one had secretly sold any processing center." The young man still answered quickly.

"Where is the information about Professor Wang?" the white-haired man asked again.

This time, another middle-aged man in the suit quickly distributed the information: "The Department of Symbols of Shuimu University has been conducting research on this area over the years, and Professor Wang Anfu is the academic leader. In addition, the CMS (CNC machine tool) of the Symbols Department has always been their supporting major."

"In other words, from the perspective of Shuimu University's laboratory, they have the possibility of researching a 5-micron machining center?" The white-haired man looked through the information and asked everyone.

None of the people present spoke, and after a while, someone nodded with difficulty. Then, the remaining people began to nod one by one, and even the middle-aged man who did not believe this the least nodded at the end.

From a possibility analysis, there is indeed such a possibility. And this is not the first time, but the second time. The first time to finish the crankshaft and the second time to turbine blades may be regarded as accidental, but the same place has made high-precision workpieces in the shortest time, which is by no means accidental.

"So, if there was such a high-precision machining center, what performance might it have?" the gray-haired man asked again.

"From the current situation, it has at least 5 microns of processing accuracy. Although it has not reached the accuracy of our best machining center, it is slowly catching up." A middle-aged man wearing glasses on the side stood up and analyzed: "But there should be a gap in their control system."

"Please refer to the processing process we learned about these two times." The man in glasses did not wait to ask questions and took the initiative to analyze: "There are the same steps both times, which is to spend a day entering the parameters. Although it is related to the fact that we did not give them digital drawings directly, it is very likely that their data is incompatible with our control data."

"There is even more likely that their control system is not perfect enough." After admitting that China might have high-precision CNC, the middle-aged man no longer insisted on the possibility of being impossible, but actively joined the discussion: "Otherwise they would not have been delayed in launching the finished product."

"I have a situation here." The young man in charge of distributing Professor Wang's information added: "From the insiders of China that we have bribed, Professor Wang submitted a paper in the first two months, titled "Design of High-precision Machine Tool Control System", which is said to be a phased result of the laboratory. I believe we can give you a reference."

At this time, even the stubborn person will no longer have any objections to the immature high-precision CNC device that has been built in the laboratory of Shuimu University.

"So, the next issue." The gray-haired man calmly announced the next question: "How should we deal with it?"

"We must kill their further development." The man in glasses also spoke calmly.

As soon as these words came out, everyone nodded.

This is basically the consensus of all countries that blockaded China over the years against China. If China does not have it, then block it. If it cannot be strictly blocked, then sell it at a sky-high price to make super high profits. Once China has it, it will reduce the price significantly, completely crushing China's local industry, making it impossible for China to develop, and can only become a certain or a few academic papers, with no actual value at all.

"Then let's open the 5-micron quad-axis machining center for them first." The white-haired man concluded: "Depending on the situation, let's discuss it first. Should they snipe when they spend a lot of money to build a factory and start selling products, or will they turn their research into outdated waste from the beginning and can only do an academic paper to finish it?"

"If you want to strike, you will hit it thoroughly." The middle-aged man was very angry that Huaxia dared to develop high-precision CNC privately: "From the root of solving a problem of data compatibility, their control system becomes worthless."

There is no objection to this. In fact, opening up restrictions can greatly increase the profits of all parties, which is a good thing for everyone. Not allowing products to be sold is certainly blocking the other party's development, but I have not gained any benefits. I can only monopolize some of the high-end processing. For capitalists, this is not a good deal.

Let go of CNC with 5 micron precision, the highest-end processing is still monopolized in one's own hands, but it can be distributed greatly. Everyone has seen the rolling banknotes recover in front of their eyes.
Chapter completed!