Zhengyifang Technology is indeed surprising in some aspects. In just these days, Zhengyifang Technology once again released a brand new silicon hairspring.

Then he appeared in front of the world again through Audemars Piguet and Rolex.

The most expensive part in a movement is actually a hairspring.

Because just mixing the appropriate metal component ratio, the hairspring has excellent anti-magnetic, temperature difference and elastic requirements, it is a big problem.

Not to mention that in the production project, the hairspring needs to constantly lengthen and thin the metal wire, and at the same time squeeze into sheet-shaped lines. During the cutting process, an error of only one thousandth of a millimeter will be generated, which will produce a 3-minute error.

Finally, the hairspring is coiled into a circular shape and installed on the balance wheel at the same time. Just listening to such complicated processes, you can know why the hairspring is the most expensive.

The traditional metal hairspring is quite complicated, and in the end, it is necessary to manually mold the hairspring, which cannot be replaced by computer machinery.

Therefore, silicon hairspring is made of wafers and cuts numerous hairsprings on the wafers through mechanical means. The size error of each hairspring is extremely small, and the mass of each silicon hairspring is quite close, without the existence of small variables in every link like a metal hairspring.

The antimagnetic capability of silicon hairspring is very outstanding, and there is no doubt that it is not metal at all.

The silicon hairspring is made by photoelectric etching, so it can make an ideal shape.

Silicon is very stable in both physical and chemical properties, and is still extremely stable even in the face of temperature changes, and its shock resistance is ten times higher than that of traditional hairspring.

The patented geometry of this silicon hairspring that is launched directly allows the movement to operate regularly at any position.

Therefore, the silicon hairspring instantly became the perfect replica that watch manufacturers dream of. This was a very difficult point in the movement parts in the past, because there were some differences in each hairspring, or each batch of hairspring, and the watchmaker needed to work hard to adjust the hairspring to its best state in the final stage.

When the watch factory obtains a perfectly-quality silicon hairspring and pairs with screw fine-tuning balance wheels or weight screws, it can use machinery and computers to quickly adjust the speed and accuracy of the movement without the need for many professional watchmakers to spend time adjusting the speed and speed of the movement; therefore, it can save a lot of costs and time for the watch factory, and consumers can also obtain more accurate and stable watches.

Once the silicon hairspring was launched, it set off a frenzy among several Swiss watch factories, and then the Swatch Group decisively joined the army of silicon hairspring.

Several watch manufacturers jointly invested in a factory that produces silicon hairspring and purchased a global license in addition to China for US$300 million.

This income alone is enough to fill the principal and interest of Zhengyifang Technology's loan this year.

It’s convenient for small businesses. In addition, the logistics service staff are less than 800. The annual R&D investment is millions per capita, with large investments and large outputs. The employees in the company are so happy.

Several large watch manufacturers have also begun to study the shape and curve of their own silicon hairspring, and the silicon hairspring released by Zhengyifang Technology has been used on the second Queen Mother watch.

The new Empress Dowager watch is also taken out by Guo Tailai, so try to make one style as much as possible. This is a gift from Guo Tailai to Ding Yumei and Mr. Ding. Well, of course, Aunt Deng is indispensable. Both are the Empress Dowagers and can’t afford to offend them.

Mr. Baker once again expressed his willingness to have a brand new watch. He planned to take a new watch and participate in the Geneva Watch Awards again, but was rejected by Guo Tailai.

Last year, Guo Tailai won the Golden Pointer Award, Best Watchmaker and Best Women's Watch Award. He will also compete for those who hate each other and give others some opportunities to participate in the competition in a few years.

Moreover, several watches are now in short supply. When new watches are launched, the watchmakers of Taylor  g are about to expand greatly, which is not in line with Guo Tailai's concept of only making masterpieces.

This is still the case when the two films "Terminator 3" and "God Walk" have not been released yet. After it is released, the current watches will become more and more crazy. Not to mention the limited edition top-quality products made by Guo Tailai, even the ordinary versions made by watchmakers are also limited editions that are crazyly sought after in the global market.

The first watch with the same style on the MJ wrist has increased by 20% in just two years. This investment is much higher than any financial product.

As for the only Zonda t-headed extreme limited edition version on the market, its value has doubled now, and no one can buy it while waving a check.

Even Lamborghini has discussed with Guo Tailai whether to release a few chirons with the t-shaped characters.

Not to mention Ferrari, just waiting for the new car to be released, even McLaren came to cooperate. If there is no new model produced by Guo Tailai, and there is no T-shaped headline, I feel embarrassed to say hello to others when I go out.

However, it’s a pity that Guo Tailai only has one, and he can only cooperate with one brand at a time.

Moreover, Guo Tailai didn't want to do anything more, but McLaren came to see Guo Tailai with the relationship between cooperation that year. Hum Kining and Hines came, but Guo Tailai had no choice but to agree to cooperate with McLaren again after completing the cooperation with Ferrari.

Guo Tailai is such a person. If you come here to have a relationship, Guo Tailai really can't refuse.

If it was just money, it would be simple. Will Guo Tailai still do things he doesn’t want to do because of money?

When talking about these things, it was actually in the studio in Gusu that Guo Tailai installed the all-titanium alloy Pagani Zonda t, while talking with the general managers of Hunkinin, Hines and McLaren.

Looking at the half-assembled Zonda  t, Humkinin and Hines's eyes were almost glaring out.

In other words, they are professional drivers, and the F1 racing car they drive is definitely not cheap, otherwise they will even saliva will flow all over the floor.

After receiving Guo Tailai's promise, McLaren's three left happily, which made Guo Tailai very depressed.

My time when I wanted to retire in the automotive industry was delayed for at least a year.

The talks lasted only lasted for one morning. Guo Tailai talked while working, while Lin Jiayi sat elegantly next to her and agreed.

Anyway, Guo Tailai talks about the general direction, and the details must be supplemented and improved by Lin Jiayi and McLaren's CEO.

When everyone was talking about cooperation in the studio, Zhao Yanyan arranged a work plan there in an office next to him.

Of course, it is definitely not just on paper. Just build a plan in your mind. Only when you get to the right place will you put the plan in your mind on paper.

Some top-secret plans will only be in Zhao Yanyan's mind.

Back then, Guo Tailai remembered a complex drawing within ten seconds, which was considered a genius when he became famous in one battle. However, Zhao Yanyan's reputation as a genius was earlier than Guo Tailai. When Guo Tailai was a junior high school student, she was already a student of Shuimu University.
Chapter completed!