Takaji Fujita stayed in Hanzhong until June. After completing two mbp-110s, he was asked to join the construction of the Hanzhong branch of the "Shengguang Aerospace Consortium" as a special consultant.

Fujita has no autonomy in this job, because his friends in Tokyo advised him not to return home recently because the Tokyo District Inspection Special Search Department listed him as an important suspect - he would definitely be arrested when he returned.

When Fujita learned about the situation, he vomited three liters of blood and almost hanged himself. He didn't understand why he was so unlucky? He was obviously a Showa patriot, but he was forced to be a traitor.

This is really unfair!

Zhou Qingfeng's "consortium" was recently approved by the imperial capital. Five major projects were divided into five different places to make full use of existing resources to avoid repeated construction.

The large aircraft project was settled in Shaanxi Fei, Hanzhong.

Shaanxi Fei used to build a medium-sized "Yun Ba", with poor technical capabilities and very pitiful output. However, Shaanxi Fei's factory was very large and was known as the number one in Asia at that time.

The alliance of the ‘consortium’ means using enough foreign exchange as lubricants to integrate the domestic dispersed scientific research and manufacturing system.

The unintentional and impossible rebuilding of a new system of "Holy Light" must borrow the original industrial and mining enterprises. Simply put, it is called "taking the essence and removing the dross".

At Da Mao’s house, “Shengguang” purchased four Tu-154s from the Gubischoff Aircraft Manufacturing Factory last year, and successfully leveraged the power of Minister Cui Koff to purchase an aircraft overhaul line and even a manufacturing plant.

After the alliance collapsed, the political system of the Mao family collapsed directly, and the economy collapsed after April 1992. No one came to organize production again, and the original "cooperation" quickly turned into "moving".

Since May, dozens of Il-76s have been taking off and landing at Hanzhong Airport. A large number of Russian engineers arrived in Hanzhong from Gubishev to contact Shaanxi Flying.

Zhou Qingfeng was not afraid of leaking secrets at all. Technical personnel from Japan also participated in the planning and construction of the new production line. "Don't doubt people, but don't doubt people." The real people with problems could not escape his "identification lies".

Takao Fujita is from Toshiba Machine Tools Division, but it does not mean that he only knows machine tools. This kind of old Japanese man worked in production lines and offices for 20 or 30 years, with extremely rich technology and experience.

The initial staff of the large aircraft project exceeded 2,000, all of which were hired from home and abroad with high salaries. Fujita was asked to consider the feasibility of manufacturing and the problems it would face from a Western perspective.

The standard for feasibility is simple - mil-std.

Fujita jumped up when he saw this standard because mil-std translated into Chinese as ‘common American military standards’.

A sinkhole!

The flower planter actually moved his own enemy's standards to conduct feasibility analysis.

This set of standards covers all aspects of military equipment and is the culmination of the current US industrial system. For example, the mil-std-1534-1972 is the technical requirements for the design of aviation turbine-gas engines.

Based on the current domestic level in materials, technology, etc., the application of this set of standards is too forward. However, Zhou Qingfeng still requires that it be the norm - list the defective shortcomings and try to make up for them.

Whether it is spending money to develop it yourself, or "introduce" from the Mao family, or smuggling from the West, in short, the standards cannot be low, just find a way to solve it.

If there is no way to solve it, you can hand over the problem to the president - Mr. Zhou takes action personally, there will always be a solution.

The country is quite looking forward to this. If we really can use the US military standards without compromise, wouldn’t it mean that the industrial capacity of the flower farmer should be equal to that of the United States?

Oh my God!

I dare not think about it.

The research team of more than 2,000 people has different origins and backgrounds. The first thing is to study the Mil-std technical standards with extremely rich content.

This work went very smoothly.

Everyone drinks the health care water provided by the "Holy Light" headquarters every day, and occasionally has some scientific dreams of thought collisions at night, as if they have mastered the ability to remember everything they have read. After half a month, they have finished reading the content they need to master.

The overall plan is here to unfold.

Fujita found that this was an excellent opportunity to survey the industrial capabilities of the flower farmer, because the technology that cannot be handled in China will inevitably be caught and discussed. As long as it is discussed, the relevant data cannot be hidden.

For example, the performance of domestic aluminum alloy materials is not as good as that of the United States. However, to manufacture light and sturdy bodies, the production and processing of high-end aluminum alloys are necessary. This is reflected in the YTN project.

"Your aluminum alloy only meets the LC4 standard, has poor toughness and is sensitive to gaps, so you cannot use the 'US military standard'." At the internal meeting, Fujita deliberately picked this one out and found fault.

However, the ministries and commission members who presided over the meeting replied: "We can currently produce aluminum alloys of LC7 to meet the application of large aircraft."

No, this is different from what Fujita remembers. He asked strangely: "When did you master the production and processing capabilities of high-grade aluminum alloys?"

"We are cooperating with McDonald's to produce McDonald's 82 passenger plane. By introducing technology, Americans have helped us improve relevant capabilities. Don't worry, aluminum alloy is fine."

Nani? American!

Fujita was so angry that he was so angry that he wanted to scold him. It was indeed an evil rice beast, who was unethical, did not follow the rules, and only recognized interests.

Toshiba exported two machine tools, but it didn't make much money, but Mizu fined a lot of money, forcing Toshiba's senior executives to resign and even posted humiliating "apologies" in more than 50 newspapers in the United States.

But Mizu itself took the initiative to export sensitive aluminum alloy manufacturing technology. This thing can be used on passenger planes or bombers!

Every minute of weight loss for the bomber means an increase in the bomb load and range.

"Okay, since the aluminum alloy material has been solved, what about the processing capacity? The large frame of the machine requires a large die forging press."

According to Fujita's understanding, the mold forging press of the Zanhuajia currently has a processing capacity of only 30,000 tons, and the minimum requirement for processing the machine is 40,000 tons.

There are only a handful of countries in the world that can produce heavy die forging presses. There are only three countries, Russia, the United States, and France. They cannot even do it in Japan and need to be imported from abroad.

"Oh, this is not a problem. 'Holy Light' has completed the full acquisition of Gubishev Aluminum Factory and will start moving it this month.

All equipment will be transferred to the Ministry of Metallurgy's 112 Plant, which is the Southwest Aluminum Plant. It includes a 75,000-ton die forging press, which will be relocated and reinstalled first.

The entire relocation and reconstruction work is expected to be completed within two years, and we will not have to worry about our high-end aluminum alloy production capacity by then.

By the way, Shangsalda Titanium Factory has the same "King of Forging" and "Sheng Light" has also acquired that factory. Our titanium alloy processing capabilities will also make leap forward in two years.

Everyone knows that titanium alloys have good performance, but titanium processing is a difficult point. In order to process titanium alloys, the Alliance specially manufactures closed-type argon-filled processing chambers.

This special equipment costs a lot and has limited uses, so it is really not something that can be done casually. But now, we just need to move the ready-made ones back.

We will also manufacture a batch of new 10,000-ton die forging presses for the manufacture of workpieces such as crankshafts of high-horsepower diesel engines. The group is developing a 'two-year plan' that requires hundreds of manufacturing projects to be completed within two years."

The ministry and commission staff made a briefing on the situation, and these were all public information. Americans also knew about it and wanted to interfere, but they could not interfere. Cheerful laughter sounded in the conference room where the exchange was held.

The flower farmer will have super mold forging equipment twenty years ahead of schedule, and the "Sheng Light" also plans to complete a leap-forward technology upgrade in two years.
Chapter completed!