Yang Fan picked up the phone.

Sun Baoguo's voice soon came from inside, "Chief Master Yang, our imported CNC laser cutting equipment has been installed and debugged. We are preparing to start cutting the first thin plate in the afternoon. Do you come and see the cutting situation?"

At the beginning, when he was at the Dongjiang Shipyard, Yang Fan saw this imported CNC laser cutting equipment and made it clear that when he started formal processing, he told him.

Sun Baoguo has always remembered this.

After receiving such a call, Yang Fan seemed very happy and immediately said loudly: "I'll come here in the afternoon, just wait for me in the material preparation workshop."

They knew Dongjiang Shipyard well, so Yang Fan could go directly to the material preparation workshop, and the two of them made an agreement on the phone.

noon.

Yang Fan drove back to his big villa, not far away. It took about 30 minutes to drive. Jiang Yan was not at home, so he had lunch at his father-in-law's house.

Anyway, the two families are close, so it is common to go to Jiang Dahai's house for dinner, so they are very happy that Yang Fan and his wife come over to have dinner.

As for Yang Hao, because he was raised by his grandmother since he was a child, he was very kind to Jiang Dahai and Li Xiuzhen. His time at his grandmother's house is much greater than his time staying in his own house.

After lunch and taking a break, Yang Fan drove to Dongjiang Shipyard.

In the material preparation workshop, there was a lot of liveliness and busyness.

Many workers are busy at work stations in an orderly manner, either cutting steel plates, correcting steel plates, or processing welding bevels of steel plates.

In the workshop, a brand new large-scale equipment is very eye-catching.

This is the imported large-scale CNC laser cutting equipment. It has been debugged and is ready to start cutting the formal steel plate.

There are many people next to the machine tool, and Sun Baoguo is there personally. In addition, there are the director, deputy director, technician, equipment officer, etc. of the material preparation workshop.

"Mr. Sun, the preparations are basically ready."

Hearing this report, Sun Baoguo looked at the thin plate on the machine tool workbench, looked at the time again, pondered for a moment, and said, "Wait a little longer."

Others don’t understand a little, everything is ready, why not start cutting the first thin plate?

But Sun Baoguo's majesty was there, and when he said this, everyone could only wait a little longer. Some people seemed to guess something in their hearts, Mr. Sun should be waiting for someone.

Could it be that the top leader of our factory come and take a look...

After about two or three minutes, Sun Baoguo's face showed a clear look of happiness, and he even walked towards the workshop gate, looking very enthusiastic.

Everyone looked over.

I immediately understood what was going on.

It turned out that General Manager Sun was waiting for Chief Executive Yang to arrive.

Everyone saw that Yang Fan was walking in from outside the workshop. Then, Sun Baoguo and Yang Fan shook hands happily, and then, they were talking and laughing and walked towards the machine tool.

"Chief Commander Yang!"

"Hello, Chief Commander Yang!"

Everyone took the initiative to greet Yang Fan. At the Dongjiang Shipyard, Yang Fan's prestige would not be inferior to Sun Baoguo and other factory leaders. Some of them even respect Yang Fan very much.

Yang Fan nodded to everyone, smiled, and then said loudly: "It seems that the preparations are all done."

The person in charge of the material preparation workshop replied: "It's ready and you can start cutting."

Yang Fan noticed that there were only people from Dongjiang Shipyard here, and the staff from the machine tool manufacturer were not seen. I remember that I saw two foreigners a few days ago.

Imported equipment like this is expensive, with high installation and operation requirements. Machine tool manufacturers generally send people to guide the installation and debugging of the machine tool, and also conduct operation training.

Perhaps seeing Yang Fan’s doubts, Sun Baoguo explained: “The foreigner’s visa time has come, and he has gone back.”

I see.

Without the guidance of professionals from machine tool manufacturers, we can only rely on Dongjiang Shipyard itself. Fortunately, two workers participated in the basic training in machine tool operation.

They looked through the machine tool operation manual again, and after confirming that it was correct, they pressed the start button of the machine tool, and the machine tool started working.

The thin plate on the workbench is like cutting tofu, cut into required shapes, some complex shapes, some special angles, etc., is no problem.

In just over a dozen minutes, the large thin plate was cut for half. Seeing such high cutting efficiency, Sun Baoguo, everyone showed a happy expression on their faces.

"This efficiency is simply amazing."

“With it, our thin sheet cutting is no longer a problem.”

"You see, the cuts are beautiful and the cutting quality is very good."

“……”

Watching the machine tool cut the thin plate, the people around him chatted happily. When they heard these words, Sun Baoguo smiled happily.

Yang Fan congratulated: "Mr. Sun, starting today, you will be replacing the cannons with a bird gun, copying the shape, and cutting the thin plate with high requirements, no matter how difficult it is."

"That's it, that's it." Sun Baoguo nodded with joy.

This equipment worth more than 2 million yuan is a little expensive, but it is really pretty good.

After the cutting for a few minutes, unexpectedly, since the machine tool stopped, two machine tool operators and technical personnel in charge got together, seemingly discussing something.

What's going on?

Sun Baoguo hurried over and asked.

It turns out that the operation training time is limited, and they are not proficient, and sometimes they have to rely on thick, all-English operating instructions.

Look, when most of the steel plate is cut, they have to retrieve a new CNC program and perform some operations, they have encountered difficulties.

The English of the operation guide is obscure. Not to mention the two operators with only high school education, even those technicians do not understand the meaning of these English.

So many leaders are watching.

At this critical moment, when such a problem arose, the director of the material preparation workshop felt very embarrassed and immediately said in a deep voice: "Why don't you go to the English-Chinese dictionary and check what these words mean."

There was a technician who was about to run all the way to get the dictionary. Yang Fan stopped him, "Don't worry, let me take a look."

Everyone took the initiative to get out of the way. Yang Fan walked over and looked at the contents of the operation instructions, and couldn't help but smile easily.

For others, these English is indeed obscure and difficult to understand. Even if you look up the meaning of each word in English-Chinese dictionary, you probably still have no idea.

In addition, there are some professional vocabulary that may not be found in the English-Chinese dictionary. It is estimated that it will still be difficult for them to understand what these words mean and how to operate them.

For Yang Fan, this is not difficult at all.

I simply said the meaning of these English words and translated them very professionally. In combination with these English operating instructions, I simply guided them to operate.

Not long after, the CNC machine tool started working again.

I don’t know who shouted excitedly, and suddenly, cheers and warm applause sounded.

Niu Biography!

Awesome!

Many people's eyes looked at Yang Fan a little different, full of admiration. In such a difficult English, Chief Teacher Yang is not at all difficult.

Sun Baoguo said loudly, "This is nothing to Chief Teacher Yang. He is proficient in English and is especially good at professional English translation."

I see!

Chief Teacher Yang’s English proficiency is so high!

This CNC machine tool was working happily. Not long after, the thin plate was cut, and everyone carefully looked at the cutting quality.

The cuts are neat and very beautiful, without any burrs or slags, etc., so you can grind them with sandpaper or even without polishing them.

After measuring a few more main sizes, it is fully qualified.

The processing quality is perfect!

Science and technology are the primary productive forces, and this is true at all. With this imported CNC laser cutting machine tool, the thin plate cutting capability of Dongjiang Shipyard has jumped exponentially.

In thin plate processing, they are real shotgun replacement.

Yang Fan, Sun Baoguo and others did not rush to leave, and then looked at the cutting of the second thin plate. It was the previous CNC program. With the experience of processing the first thin plate, the workers gradually became proficient in the operation and the processing was relatively smooth.

If CNC processing is done, the first piece is qualified and the second piece should be qualified. Sure enough, the processing quality of these two thin plates is still perfect.

After watching the processing of the second thin plate, everyone felt relieved. Sun Baoguo accompanied Yang Fan to look around in the material preparation workshop and saw a variety of steel plates being cut.

Not only have some steel plates been cut, but some workers have also begun to make bevels to prepare for the next welding.

Seeing this, Yang Fan was extremely satisfied and praised: "Mr. Sun, your processing speed is very fast."

Sun Baoguodao: "With the experience and foundation of the first ship, we feel that the manufacturing of this ship is much smoother. Oh, by the way, the welding of the first steel plate is about to begin. I'll take you over and take a look."

Yang Fan looked surprised again, and the welding of the first batch of steel plates will begin so soon.

The two walked into the welding workshop.

The No. 3 ship of the Type 054 missile frigate was cut into part of the steel plates and the welding bevel was cut, and they were sent to the welding workshop.

While continuing to cut steel plates in the material preparation workshop, they will first weld here. Under the leadership of Sun Baoguo, everyone came to one of the welding stations.

The steel plate welding of Ship No. 3 will be carried out here.

When Yang Fan saw the welding worker, he felt it was quite familiar. When he looked carefully, he immediately recognized it. This was the first welding person in Dongjiang Shipyard - Zhang Yi.

Yang Fan couldn't help but feel a little happy.

At the same time, I also knew in my heart that Dongjiang Shipyard still attached great importance to the welding of steel plates of Ship No. 3, and sent elite soldiers without any care.

………

The chapter title of the previous chapter is wrong, it should be Chapter 459, and the content is not wrong.
Chapter completed!