Three people in a group, cooperate with each other, and the speed is good.

In just two or three days, the entire process and technical information was translated one after another. In the blank space of the copy version, next to the French, the translated Chinese was written.

Gu Zhengxin once again walked into the large office where the translation was concentrated and asked: "Director Yuan, there is really a whole copy of the technology and technical materials that have been translated out!"

As the director of the Hongqi Factory Technical Center, Yuan Hui is one of Gu Zhengxin's arms and is also specifically responsible for the translation of these materials.

He took a translated copy of the information, raised Yang and replied loudly: "Three copies of the information have been translated one after another, please take a look."

After a few steps forward, Gu Zhengxin picked up one of the materials and carefully looked it up. Gradually, his face showed a look of joy.

“It’s a good translation!”

Although he doesn't understand French, after reading the Chinese translation next to him, as a professional, he can still see the quality of the translation.

He picked up the other two books and roughly read them. He became even happier. He looked at the people who were translating in the big office with satisfaction and praised them.

"Three groups have completed the translation of the first technical information. They are good, thank you for your hard work. On behalf of the factory, I would like to thank them."

After saying that, he took the lead in applauding.

Warm applause rang out, and the three members of the translation team who completed the first technical information were all happy.

Chief Executive Gu’s face-to-face praise!

Such praise may be difficult to encounter once!

The members of other groups looked at them enviously and thought to themselves, "We should work hard, and strive to complete the translation of the first technical information as soon as possible."

Technical data have been translated one after another, and the preparation of process regulations has begun immediately.

Gu Xinjun said: "Director Yuan, these books have been translated. You should know what to do next."

"I know." Yuan Hui replied: "The process technicians in the material preparation workshop have been ready for a long time. I personally call them to meet to prepare the process regulations."

To conduct trial production of the 054 diesel engine, Hongqi Factory needs guiding documents, that is, the official version of the process regulations.

The basis for preparing formal process regulations is the translated French version of process technical materials, which are transformed into Hongqi Factory's own process regulations based on them.

The first step in the trial production of diesel engines is to prepare materials!

The first thing to do is to prepare the process regulations of the material preparation workshop. With these translated French technical materials, it is not difficult to prepare.

However, it may only take time.

Preparing a process code is not an easy task. It can only be done by a craftsman to complete a process code of a drawing number, and it is impossible for two or three to prepare it together.

Material preparation is the first step, while blank processing is the second step.

Yuan Hui was very efficient, so he immediately organized a meeting of more than a dozen process technicians in the material preparation workshop to personally arrange the process regulations.

"This is a translated French technical data. Based on these data, the preparation process procedures will be prepared immediately. The faster the better."

"We have been waiting for these technical information for a long time."

The technical director of the material preparation workshop was happy and almost patted his chest to ensure that they would work overtime to complete these process regulations as soon as possible.

After the meeting, the technical system of the material preparation workshop became busy.

All process technicians are preparing process regulations. Even at night, they work until very late and continue the next day.

Race against time!

Grab the time!

The effect is still good. In about a week, the first official version of the material preparation process is completed. It is a material preparation process for bar materials.

The material grades with bar materials have specifications, such as how thick, how long, and how many processes are there, what is the length of the following materials and what are the inspection specifications.

Overall, the preparation process procedures are not long, and are basically based on three or five processes. The difficulty in preparing such process procedures is not very high.

Next, the preparation process engineering of several bar materials and the process regulations of sheet materials were completed one after another.

Seeing such results and such speed, Gu Zhengxin felt relieved. This was completely within his acceptance range, and he finally didn't delay much time.

Translation work continues.

After translating the French technical data of the finished materials, each translation team began to translate French technical data of the blank processing.

One after another, one by one, one French material was translated and handed over to the blank workshop where they prepared the blank processing process regulations.

Hongqi Factory has two blank processing workshops, one is the forging workshop, which mainly processes blank forgings, and the other is the casting workshop, which processes blank castings.

Compared with material preparation, the processing difficulty of blanks is of course greater, unlike the process of preparing materials that only include cutting and inspection.

Whether it is forging or casting of blanks, the process is more complicated, and the process regulations for each drawing number are much longer.

There are as few as dozens of processes and as many as twenty processes. Each process has a lot of written descriptions, and a process diagram is also required.

The workload is multiplied!

Here, the preparation of process regulations has slowed down significantly, and Gu Zhengxin saw it and was anxious. He had to go to two rough workshops every day to check it out. Seeing that there was not much progress, his brows frowned slightly.

The technical director of the casting workshop led more than ten technicians in their workshop to prepare the casting blank process regulations. Seeing that General Manager Gu's face looked a little bad, he knew what was going on.

He said helplessly: "Mr. Gu, it's not that we don't want to be faster, but that we really can't get faster. Each process has a process diagram and a written description of each step. A technician will only prepare one or two processes in a day."

Gu Zhengxin was silent for a while!

Of course he knew this. The preparation of process regulations consumed a lot of time to draw process graphics. If the drawing speed could be faster, the speed could be much faster.

For example, after drawing the process diagram, the process diagram of the next process is not much different from the process diagram of the previous process.

But what if that happens, you still have to draw the craftsmanship diagrams in strokes. You can't be careless at all and you can't be lazy at all.

This is just the process regulations for blank processing!

In the future, there will be mechanical processing procedures for each part. For slightly more complex parts, the processes will last dozens of times, involving many processes such as turning, grinding, drilling, milling, boring, etc. Each process not only requires a lot of text description, explaining the specific operations of each step, listing process parameters, but also having process graphics.

That's even more workload!

A diesel engine has thousands of diagram numbers, and at least thousands of process regulations have to be prepared. Such a workload is probably not enough to be completed in a year.

Gu Zhengxin became anxious!

When he saw an old craftsman in his fifties meticulously preparing the process rules for casting blanks for a certain part, he was even more anxious!

I saw that the old craftsman was slow and neatly wrote the characters imitating Song. The characters were written really beautifully, almost like printed.

But it's slow!

Gu Zhengxin wished he could get faster. He only watched it for two minutes and felt unable to stand it, so he had to leave the casting workshop first.

I returned to the office and couldn't recover for a long time.

After gradually recovering from his senses, Gu Zhengxin couldn't help but think that the design workload of the 054 ship is so huge that it requires drawing thousands or even tens of thousands of design drawings. The workload of so many drawings is more than several times larger than the workload of their Hongqi Factory to prepare process regulations.

The Donghai Institute can complete the comprehensive design of the 054 ship in just two or three years, which is almost impossible!

There are so many drawings that need to be drawn. They can’t complete them in two or three years, at least four or five years.

How did they do the comprehensive design after two or three years???

Gu Zhengxin really can't figure it out!

Yang Fan's confidence came to his mind, knowing that he was definitely not bragging, but was full of confidence.

Gu Zhengxin thought about it and didn't come up with any reason.

After hesitating for a while, I picked up the phone, dialed a number, and prepared to call Donghai Institute, so I asked specifically.

You must understand this matter!

With so many design drawings, how did Donghai Institute do it?

It can actually complete the comprehensive design within two or three years!

Unbelievable!

......
Chapter completed!