"Sir, I actually have some relatively mature ideas about the new magic machine tools... Whether it is the Magic Research Institute or our Magic Machine Tool R&D Center... But in terms of specific research and development, I encountered a very important problem, and this problem is almost impossible to solve..."

Seeing Kambie's face full of embarrassment, Xu Yi didn't think about it and immediately said, "It's a material problem, right?"

Camby was stunned and responded quickly: "Yes, it's a material issue. President, your requirement for the new magic machine tool is mainly to improve the power of the magic machine tool. I understand your idea is to rely on higher specifications of magic machine tools to create more powerful magic machines."

"Yes, if the specifications of magic machine tools are too low, we will be limited if we want to manufacture large magic machines. Therefore, we must first solve the problem of magic machine tools." Xu Yi nodded.

Kambi smiled bitterly: "But after the various powers of the magic machine tools have been improved, the requirements for materials have become much higher. For example, when we were developing a new medium-sized model of magic stamping machine some time ago, the machine tools can only withstand no more than 10,000 stampings at most, and severe cracks will appear and we cannot continue working."

"Ten thousand times?" Xu Yi frowned. "This is too little, right? Haven't you thought of other ways to relieve it?"

"I thought about it, for example, covering the outer layer of the magic machine tool to offset the vibration force and slow down the impact on the machine tool, but the effect is not obvious." Camby sighed. "After all, if you want to achieve the proper stamping effect, the machine tool itself must bear the corresponding punch pressure, which cannot be avoided. So in the final analysis, only by solving the problem of the material itself for casting the magic machine tool."

Xu Yi also smiled bitterly: "There is no way. I can't do anything about this problem. Material research is something that cannot be rushed. There is no shortcut to take."

Every time I discuss materials issues with Cambi and others, Xu Yi regrets that when he was on Earth, he did not learn more about materials science, so he could not rely on his experience on Earth to promote the development of the New Air Chamber of Commerce in this regard.

However, his material science is profound and profound. Even if Xu Yi had this idea at that time, he probably wouldn't have the time.

Now he can build the New Aircraft Chamber of Commerce in Bonta City in just over three years with his knowledge of mechanical engineering. It cannot be said that this is wrong.

After all, the industrial system is extremely complex and far from being able to take full control of it alone.

"Fortunately, we already have many kinds of non-ferrous metals. As long as we conduct more research, I think we can always make breakthroughs in material research and find the right alloy to create this kind of magic machine tool that needs to resist strong impulse." Xu Yi comforted Kambi. "As for now, let's do research under limited conditions first."

"That's all." Camby nodded, but then became excited again. "But President, the research on the new magic machine tool is not all bad news."

"Oh? There is still a breakthrough. Tell me, what aspects did it make? Is it the quick knife-moving problem of the magic lathe you mentioned last time, or the precise positioning problem of the magic stamping machine that Potru's last time?"

"These are all small problems, how could I report them to you specifically?" Camby shook his head and said proudly: "In fact, it is the problem of automatic control of magic machines that you mentioned countless times before."

Xu Yi was stunned and was immediately surprised: "No way? Is it possible that the self-control magic machine tool you developed? How is this possible!"

"Hehe, just come with me."

Xu Yi followed Cambi to the actual operation workshop of the Magic Machine Tool R&D Center with an incredible look. He saw a brand new magic machine tool standing in the middle of the workshop. The dwarf Potru was holding a piece of steel plate one meter square to put it in.

"Wait, Potru, let the President see." Camby shouted Potru.

Potterou looked up at Xu Yi, stopped the movement in his hand, and waited for Xu Yi and Kambi to come to the magic machine tool with a slower movement to stuff the steel plate into a slot of the magic machine tool.

The steel plate happened to be placed in the slot. Botruk pressed a button on the magic machine tool and then stepped back two steps to show that he was not interfering at all.

Xu Yi saw that the magic machine tool automatically started, sent out the steel plate in the slot, and then cut off a semicircular corner by a piece of slice.

After completing this process, the slot of the magic machine tool automatically turns the steel plate in a circle, moves to the next to the slice again, and the semicircular corners are also cut off.

This was repeated several times. After all the four corners of the steel plate were cut, the slit grooves would cause the steel plate to sink again, and then they were divided into two ends to clamp. Then, under the guidance of the two iron clips, they slightly folded upwards and bent slightly, and then the slit grooves would be sent out again.

Xu Yi looked at the steel plate with a big change in appearance in surprise, and then looked at the magic machine tool, and his emotions became slightly excited.

That's right, although the movements are still very simple and the process that can be completed is relatively simple, no one intervenes in the entire operation of this magic machine tool, and it is completely purely automatic!

This means that as long as further research is further deepened in the future, an automatic magic machine tool that is comparable to that of CNC machine tools on the earth may appear on the Sainz continent!

Xu Yi took a breath, suppressed the excitement in his heart, and signaled Botru to send the steel plate into the magic machine tool again.

Botru's continued to do it, and then Xu Yi saw that the steel plate was processed in the same process again and was finally sent out.

Xu Yi put the two steel plates in front and back together and compared them, and was surprised to find that the two steel plates were exactly the same!

He even asked Camby to take a vernier caliper for measurement, and found that the error was not more than 0.1 mm!

Although this is far behind those high-precision CNC machine tools on Earth, it is already very amazing to the industrial level on the Sainz Continent.

Xu Yi asked Botru's operation several times. Finally, after comparing the processed steel plates, he found that the maximum error of various parameters of these steel plates did not exceed 0.2 mm.

"Great!" Xu Yi couldn't help but shouted loudly, then patted Camby and Potru on the shoulders. He said excitedly: "You did a great job! With this thing, our chamber of commerce will greatly improve the production efficiency. I don't have to worry about production capacity! Haha, that's great! I want to commend you on behalf of the chamber of commerce! I decided to remember it for you..."

"Wait!" Cambi suddenly interrupted Xu Yi. "Sir, the biggest contributor to the creation of this automatic magic machine is not us, but Sancheli. If you want to give a reward, you should give it priority."

"Sancheli?" Xu Yi was stunned for a moment, and then he dug out the person corresponding to this person's name from the depths of his mind. "It turned out to be him, no wonder..."

Since last time she showed a breakthrough in magic programming technology research on magical programming technology on the magic fountain in the new municipal square, Sancheli has not seen any new research results for nearly two years, so that Xu Yi almost forgot about this person.

Unexpectedly, Sancheli jumped out without warning on this automatic magic machine tool that was very excited by Xu Yi and could solve the factory production capacity problem that had plagued him for a long time.

Xu Yi was stunned for a while before asking Camby: "You mean, Sancheli, the automatic magic machine tool, is also involved in the research and development?"

"It is not very accurate to say that he participates. To be precise, the idea of ​​this automatic magic machine was the first to propose it." Camby replied. "If he hadn't told us that we could set it in advance through magic and let the magic machine automatically complete some set actions, we would never have thought of this aspect. Moreover, the most important automatic control magic array on this magic machine was completed by him. So I think the biggest contributor should be him."

"Well, we just changed the structure of the magic machine tool accordingly. It's nothing. It's far worse than the self-controlled magic array he solved. The Magic Research Institute also meant this, and I think Sancheli should be given the first merit." Potrulu also said.

Xu Yi thought about it, but suddenly snorted coldly: "Why no one came to inform me in advance for such an important research and development? Even until today, you are almost successfully developing this automatic magic machine tool. I didn't know? Don't you take me, the president, seriously?"

Seeing Xu Yi's gloomy face, Cambi and Potru were both startled. Cambi waved his hand hard and explained: "Sir, don't get me wrong. It's not that we deliberately hide it from you, but Sanchelith strongly requested us not to disclose it to you in advance."

"Yes, Sancheli said that he had been in the Chamber of Commerce for several years and always felt very sorry for you. If the research and development of this automatic magic machine tool is successful, it can be regarded as a reward for you. But if the research and development fails, he feels even more shameless to see you, so he dare not let you know at all." Potru's also explained.

"Hmph, does he mean he has the right to see me now?" Xu Yi still looked unhappy. "Since he doesn't dare to see me on his own initiative, I will not go to him on his own initiative. You tell him for me that after the automatic magic machine tool is fully developed, I will give special commendation and reward to all those involved in the research and development. If he doesn't appear at that time, he will not appear in front of me in the future!"

After leaving this sentence, Xu Yi turned around and left the Magic Machine Tool R&D Center.

However, after walking less than a hundred meters, Xu Yi could no longer hold back the expression on his face and burst into laughter from the bottom of his heart.

Compared to how much money the Chamber of Commerce makes, he will always be more willing to see the breakthroughs made by the Chamber of Commerce in technological research and development.

Among all the technological research and development, he attaches the most importance to the technological research and development of magic machine tools, which are the most common but most demanding in the industrial system.

Before this, the development of automatic magic machine tools was just an idea in his mind, because he knew how difficult it was to study magic array preprogramming technology, so he had always been very patient with Sancheli.

However, now, Sancheli has secretly cooperated with the Magic Research Institute and the Magic Machine Tool R&D Center to successfully develop automatic magic machine tools!

No matter how simple this automatic magic machine tool is, it is a big gap compared to those high-precision CNC machine tools on the earth, but this means that the Xinfei Chamber of Commerce has finally taken the first step in this research.

As long as we persist in research and development in the future, we will sooner or later catch up with the standards on the earth.

How could Xu Yi not feel extremely happy after learning such great news? (To be continued...)
Chapter completed!